prikaz prve stranice dokumenta Numerička analiza udarnog opterećenja elastoplastičnog materijala
  Download
PDF 3.08 MB
undergraduate thesis
Numerička analiza udarnog opterećenja elastoplastičnog materijala
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:479371
Drašković, Krunoslav
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Drašković, K. (2023). Numerička analiza udarnog opterećenja elastoplastičnog materijala (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:479371

Drašković, Krunoslav. "Numerička analiza udarnog opterećenja elastoplastičnog materijala." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:479371

Drašković, Krunoslav. "Numerička analiza udarnog opterećenja elastoplastičnog materijala." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:479371

Drašković, K. (2023). 'Numerička analiza udarnog opterećenja elastoplastičnog materijala', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 05 September 2024, https://urn.nsk.hr/urn:nbn:hr:235:479371

Drašković K. Numerička analiza udarnog opterećenja elastoplastičnog materijala [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 September 05] Available at: https://urn.nsk.hr/urn:nbn:hr:235:479371

K. Drašković, "Numerička analiza udarnog opterećenja elastoplastičnog materijala", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:479371

Metadata
TitleNumerička analiza udarnog opterećenja elastoplastičnog materijala
Title (english)Numerical analysis of impact loading of elastoplastic material
AuthorKrunoslav Drašković
MentorLana Virag (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je analizirano udarno opterećenje uz pojavu plastičnih deformacija i pripadno povećanje nosivosti. Kako bi se provjerio numerički postupak, prvo su dobivena numerička rješenja, u programskom paketu Abaqus/Explicit, za pad tereta tijela na gredu na dva prepusta, jer za taj slučaj postoji analitičko rješenje. U prvom koraku su se promatrale samo elastične deformacije, a u drugom je opterećenje povećano kako bi se moglo analizirati i analitički provjeriti širenje elasto-plastičnih zona. Nakon što je osigurana točnost numeričkog postupka, modeliran je suprotni slučaj udar deformabilnog tijela u kruti zid uzimajući u obzir elastične, te elasto-plastične deformacije. Za primjer deformabilnog tijelo uzet je okvir automobila. Uspoređene su brzine udara deformabilnog tijela sa zidom kod kojih dolazi do pojave prvih plastičnih deformacija, te pojave potpuno plastificiranih zona za odabrani niskougljični čelik i aluminijsku leguru.
Abstract (english)
In this thesis, the impact load with the development of plastic deformations and the corresponding increase in load capacity was analyzed. In order to verify the numerical procedure, solutions were first obtained numerically, in the Abaqus/Explicit software package, for the body load falling on the simply supported beam. For such case, it is easy to find an analytical solution. In the first step, only elastic deformations were observed, and in the second, the load was increased in order to perform analysis and analytical verification of elastoplastic zone growth. After ensuring the accuracy of the numerical procedure, the opposite case was modeled the impact of a deformable body into a rigid wall, taking into account elastic and elastoplastic deformations. As an example of a deformable body, a car frame was considered. The impact velocities of a deformable body at which the first plastic deformations occur and the velocities needed for the appearance of completely plasticized zones for selected low-carbon steel and aluminum alloy were compared.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:479371
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-09-21 16:29:27