prikaz prve stranice dokumenta Usporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku
  Download
PDF 6.19 MB
master's thesis
Usporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:434352
Grgić, Ana
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Grgić, A. (2023). Usporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:434352

Grgić, Ana. "Usporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:434352

Grgić, Ana. "Usporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:434352

Grgić, A. (2023). 'Usporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:434352

Grgić A. Usporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:434352

A. Grgić, "Usporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:434352

Metadata
TitleUsporedba abrazijske otpornosti tikovine u poprečnom, radijalnom i tangencijalnom presjeku
Title (english)Comparison of the abrasion wear resistance of the teak wood in cross, radial, and tangential sections
AuthorAna Grgić
MentorVera Rede (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-12-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U diplomskom radu analizirana je mikrostruktura i istražen utjecaj usmjerenosti strukture drva tikovine na abrazijsku otpornost i tvrdoću. Mikrostruktura je analizirana na svjetlosnom mikroskopu i pomoću računalne tomografije. Tvrdoća je mjerena metodom po Brinellu, a intenzitet abrazijskog trošenja određen je na uređaju Taber abrader. Mikrostruktura tikovine je izrazito usmjerena, a traheje su grupirane u ranom dijelu goda. Gustoća tikovine iznosila je 0,67 g/cm3. Najveća otpornost na abraziju izmjerena je na poprečnom presjeku. Tangencijalni i radijalni presjek imaju manju i međusobno sličnu otpornost na abraziju. Veličina abrazivnog zrna ima veliki utjecaj na intenzitet abrazijskog trošenja kod sva tri osnovna presjeka. Na svim presjecima uočen je fenomen kritične veličine abrazivnog zrna i iznosi oko 125 μm. Najviša srednja vrijednost tvrdoće izmjerena je na poprečnom presjeku i iznosi 8,89 HB. Tangencijalni i radijalni presjek imaju niže i međusobno slične vrijednosti tvrdoće.
Abstract (english)
In this thesis, the microstructure of teak wood has been analyzed and the influence of the structure's orientation on abrasion resistance and hardness was investigated. The light microscope was used to analyze the teak microstructure, as well as computerized tomography. Hardness was measured using the Brinell method while intensity of abrasive wear was determined on a Taber abrader. The microstructure of teak wood is highly oriented with vessels grouped together in the earlywood. The density of teak wood was measured and it amounted to 0.67 g/cm³. The highest abrasion wear resistance was measured in the cross section. The radial and tangential sections have lower resistance to abrasion than cross section, as well as very similar amongst themselves. The size of the abrasive grain has a significant impact on the intensity of abrasion wear in all three primary sections. The phenomenon of critical abrasive grain size was observed in all three sections and is about 125 μm. The highest average Brinell hardness was measured in the cross section and has reached 8.89 HB. The tangential and radial section exhibit lower and relatively similar hardness values to each other.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:434352
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-12-06 10:54:51