prikaz prve stranice dokumenta Unaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal
  Download
PDF 2.45 MB
master's thesis
Unaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:399013
Mačvanin, Luka
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Mačvanin, L. (2023). Unaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:399013

Mačvanin, Luka. "Unaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:399013

Mačvanin, Luka. "Unaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:399013

Mačvanin, L. (2023). 'Unaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 13 July 2024, https://urn.nsk.hr/urn:nbn:hr:235:399013

Mačvanin L. Unaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 July 13] Available at: https://urn.nsk.hr/urn:nbn:hr:235:399013

L. Mačvanin, "Unaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:399013

Metadata
TitleUnaprjeđenje procesa savijanja lima smanjivanjem naprezanja u materijal
Title (english)Improvement of bending process of sheet metal by stress reducing in the material
AuthorLuka Mačvanin
MentorZdenka Keran (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-12-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Cilj diplomskog rada je bio predložiti moguća unaprjeđenja procesa u smislu smanjenja naprezanja tijekom procesa oblikovanja deformiranjem, točnije postupka savijanja. Moguće promjene su analizirane računalnom simulacijom u programu MSC Marc Mentat SE, a proveden je i proračun sila i naprezanja. Prije analize su opisane tehnologije oblikovanja deformiranjem, mehanizmi koji se odvijaju tijekom oblikovanja, kao i prednosti oblikovanja deformiranjem u odnosu na druge. Opisane su tehnologija oblikovanja savijanjem, vrste savijanja, alati za savijanje i momenti kojima je materijal izložen tijekom savijanja. Na kraju rada, u zaključku će su predložena moguća unaprjeđenja.
Abstract (english)
The goal of the thesis was to propose possible process improvments in terms of stress reduction during the forming process by deformation, more precisely the bending process. Possible changes were analyzed by computer simulation in the MSC Marc Mentat SE program, forces and stresses were also calculated. Before the analysis, deformation forming technologies were described, the mechanisms that take place during forming, as well as the advantages of deformation forming compared to others. Bending forming technology, types of bending technology, tools used for bending, and moments to which material is exposed during bending were described. At the end of the work, possible improvements were suggested in the conclusion
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:399013
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-12-06 14:05:49