prikaz prve stranice dokumenta Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames
  Download
PDF 2.11 MB
Scientific paper - Preliminary note / Short communication
Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames
Tehnički vjesnik, 26 (2019), 3; 831-836. https://doi.org/10.17559/TV-20180222140915
Anić, Filip; Penava, Davorin; Varevac, Damir; Sarhosis, Vasilis

Institutional repository: Repository GrAFOS

Cite this document

Anić, F., Penava, D., Varevac, D. & Sarhosis, V. (2019). Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames. Tehnički vjesnik, 26. (3), 831-836. doi: 10.17559/TV-20180222140915

Anić, Filip, et al. "Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames." Tehnički vjesnik, vol. 26, no. 3, 2019, pp. 831-836. https://doi.org/10.17559/TV-20180222140915

Anić, Filip, Davorin Penava, Damir Varevac and Vasilis Sarhosis. "Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames." Tehnički vjesnik 26, no. 3 (2019): 831-836. https://doi.org/10.17559/TV-20180222140915

Anić, F., et al. (2019) 'Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames', Tehnički vjesnik, 26(3), pp. 831-836. doi: 10.17559/TV-20180222140915

Anić F, Penava D, Varevac D, Sarhosis V. Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames. Tehnički vjesnik [Internet]. 2019 [cited 2024 November 14];26(3):831-836. doi: 10.17559/TV-20180222140915

F. Anić, D. Penava, D. Varevac and V. Sarhosis, "Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames", Tehnički vjesnik, vol. 26, no. 3, pp. 831-836, 2019. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:133:803408. [Accessed: 14 November 2024]

Metadata
Title (english)Influence of Clay Block Masonry Properties on the Out-of-Plane Behaviour of Infilled RC Frames
AuthorFilip Anić
AuthorDavorin Penava
AuthorDamir Varevac
AuthorVasilis Sarhosis
Author's institutionJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Abstract (english)
In order to determine the characteristics that govern the out-of-plane behaviour of masonry infills, two groups of wall specimens were built and tested in the laboratory. Specimens were assembled and tested as described in EN 1052-2 provisions and constitute of flexural strength for a plane of failure parallel and perpendicular to the bedjoints specimens. By obtaining data from experiments, numerical micromodels were developed to predict their mechanical behaviour. A calibration procedure undertaken and results obtained from the experimental campaign were found to be in agreement with those obtained from the numerical models. Additionally, former inplane infilled frame numerical models were tested with acquired out-of-plane calibrated material model. No significant difference was found.
Keywords (english)
Languageenglish
Publication typeScientific paper - Preliminary note / Short communication
Publication statusPublished
Peer reviewPeer review
Publication versionPublished version
Journal titleTehnički vjesnik
Numberingvol. 26, no. 3, pp. 831-836
p-ISSN1330-3651
e-ISSN1848-6339
DOIhttps://doi.org/10.17559/TV-20180222140915
URN:NBNurn:nbn:hr:133:803408
Publication2019
Document URLhttps://hrcak.srce.hr/221011
Type of resourceText
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2019-07-17 06:42:27