prikaz prve stranice dokumenta Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka
Access restricted to students and staff of home institution
undergraduate thesis
Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2020. urn:nbn:hr:133:439160
Čičković, Mia
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Technical Mechanics

Institutional repository: Repository GrAFOS

Cite this document

Čičković, M. (2020). Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:439160

Čičković, Mia. "Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:133:439160

Čičković, Mia. "Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:133:439160

Čičković, M. (2020). 'Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:133:439160

Čičković M. Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2020 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:133:439160

M. Čičković, "Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:133:439160

Metadata
TitleIzračun unutrašnjih sila za nadstrešnicu i planovi pomaka
Title (english)Calculation of inner forces for a frame calopy and projections of displacements
AuthorMia Čičković
MentorAleksandar Jurić (mentor)
Committee memberSilva Lozančić (predsjednik povjerenstva)
Committee memberAleksandar Jurić (član povjerenstva)
Committee memberGoran Gazić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Technical Mechanics)
Osijek
Defense date and country2020-10-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Technical Mechanics (Mechanics of Rigid and Deformable Bodies)
Abstract
U sklopu kolegija Mehanika 1 zadatak za završni rad sastoji se od dva dijela. U prvom dijelu zadanog zadatka za konstrukcijski sustav sa crteža treba izračunati unutrašnje sile u presjeku n-n na dva načina. Prvi način je klasični postupak iz uvjeta ravnoteže gdje se posebno proračunavaju momenti savijanja, poprečne i uzdužne sile, a drugi način je izračun pomoću metode virtualnog rada. Pored samog izračuna treba nacrtati dijagrame unutrašnjih sila. Rezultate je potrebno kontrolirati i prikazati u jednom od programskih paketa, ovdje je to odrađeno u Autodesk Robot Structural Analysis. Drugi dio zadatka čini mehanizam za kojega se trebaju odrediti kutovi zaokreta tijela 2 i 3, te pomaci točaka C, D, E, F i G pomoću zadanog kuta zaokreta tijela 1. Ovaj zadatak treba riješiti sa planovima pomaka, tj. određivanjem polova pomaka, crtanjem poznatih kinematskih veličina jednog tijela, konstruiranjem plana pomaka preostalog dijela mehanizma i određivanjem kinematskih veličina svih tijela iz geometrijskih uvjeta. Sve rezultate je potrebno prikazati i kontrolirati računskim putem.
Abstract (english)
As part of the course Mechanics 1, the final work task consists of two parts. In the first part of the given task for the structural system from the drawing, the internal forces in the section n-n should be calculated in two ways. The first method is a classical procedure from equilibrium conditions where bending moments, transverse and longitudinal forces are calculated separately, and the second method is a calculation using the virtual work method. In addition to the calculation itself, diagrams of internal forces should be drawn. The results need to be controlled and displayed in one of the software packages, here it is done in Autodesk Robot Structural Analysis. The second part of the task is the mechanism for which the angles of rotation of bodies 2 and 3 are to be determined, and the displacements of points C, D, E, F and G by means of a given angle of rotation of body 1. This task should be solved with displacement plans. by drawing the known kinematic quantities of one body, by constructing a plan of displacement of the remaining part of the mechanism, and by determining the kinematic quantities of all the bodies from the geometrical conditions. All results need to be displayed and controlled by calculation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:133:439160
Study programmeTitle: Undergraduate university programme in civil engineering; specializations in: General course
Course: General course
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-12-04 13:34:26