prikaz prve stranice dokumenta Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka
Access restricted to students and staff of home institution
undergraduate thesis
Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2020. urn:nbn:hr:133:999347
Erjavac, Ana
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Technical Mechanics

Institutional repository: Repository GrAFOS

Cite this document

Erjavac, A. (2020). Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:999347

Erjavac, Ana. "Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:133:999347

Erjavac, Ana. "Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:133:999347

Erjavac, A. (2020). 'Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 02 May 2024, https://urn.nsk.hr/urn:nbn:hr:133:999347

Erjavac A. Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2020 [cited 2024 May 02] Available at: https://urn.nsk.hr/urn:nbn:hr:133:999347

A. Erjavac, "Izračun unutrašnjih sila za nadstrešnicu i planovi pomaka", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:133:999347

Metadata
TitleIzračun unutrašnjih sila za nadstrešnicu i planovi pomaka
Title (english)Calculation of inner forces for a frame canopy and projections of displacements
AuthorAna Erjavac
MentorAleksandar Jurić (mentor)
Committee memberAleksandar Jurić (predsjednik povjerenstva)
Committee memberSilva Lozančić (član povjerenstva)
Committee memberGoran Gazić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Technical Mechanics)
Osijek
Defense date and country2020-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Technical Mechanics (Mechanics of Rigid and Deformable Bodies)
Abstract
Završni rad se sastoji od zadatka iz dva dijela. Prvi zadatak u prvom dijelu potrebno je izračunati unutrašnje sile u presjeku n-n za zadano opterećenje. Unutrašnje sile računaju se pomoću dvije metode : klasičan postupak iz uvjeta ravnoteže i metodom virtualng rada. Potrebno je nacrtati dijagrame unutrašnjih sila za zadanu konstrukciju na način da se u svakoj točki opterećenja klasičnim postupkom iz uvijeta ravnoteže izračunaju unurašnje sile. Rezultate je potrebno prekontrolirati u jednom programskom paketu. U drugom dijelu za zadani mehanizam potrebno je odrediti kuteve zaokreta zadanih tijela, te pomake zadanih točaka. Pomoću zadanog kuta zaokreta tijela 1 određujemo kinematske veličine, kutove zaokreta i pomake, preostalih tijela konstrukcije. Zadatak se riješava pomoću planova pomaka odnosno pomoću određivanja polova pomaka, crtanja poznatih kinematskih veličina jednog tijela, konstruiranja plana pomaka preostalog dijela mehanizma i određivanje kinematskih veličina svih tijela iz geometrijskih uvjeta. Rezultate je potrebno prekontrolirati vektorskim računom.
Abstract (english)
The final paper assignment consists of two parts. The first part of the assignment is to calculate internal forces in the n-n section due to the given load. Internal forces are calculated by two methods: static equilibrium condition and the method of virtual work. It is required to draw diagrams of internal forces for given construction in a way that for each point of the load internal forces are calculated by static equilibrium condition. The results are required to be checked in a software package. The second part of the assignment is to establish the angles of rotation of given structural members for given construction and to determine displacements of given points. Based on the angle of rotation for structural member 1 we define kinematic sizes, angles of rotations and displacements for the remaining structural members of construction. Calculations are made using the projections of displacements, i.e. by defining the displacement, drawing the known kinematic sizes of one structural member, constructing the displacement diagram of the remaining part of construction and determining kinematic sizes of all structural members from geometric conditions. Calculations are checked using the vector calculus.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:133:999347
Study programmeTitle: Undergraduate university programme in civil engineering; specializations in: General course
Course: General course
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-01-12 07:46:27