prikaz prve stranice dokumenta Oblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka
Access restricted to students and staff of home institution
master's thesis
Oblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. urn:nbn:hr:133:619847
Vrlja, Matko
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Technical Mechanics

Institutional repository: Repository GrAFOS

Cite this document

Vrlja, M. (2022). Oblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:619847

Vrlja, Matko. "Oblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:619847

Vrlja, Matko. "Oblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:619847

Vrlja, M. (2022). 'Oblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 05 May 2024, https://urn.nsk.hr/urn:nbn:hr:133:619847

Vrlja M. Oblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2022 [cited 2024 May 05] Available at: https://urn.nsk.hr/urn:nbn:hr:133:619847

M. Vrlja, "Oblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:133:619847

Metadata
TitleOblikovanje i proračun ljuski pri djelovanju hidrostatskog tlaka
Title (english)Design and analysis shells under the action of hydrostatic presure
AuthorMatko Vrlja
MentorDavorin Penava (mentor)
Committee memberAleksandar Jurić (predsjednik povjerenstva)
Committee memberDavorin Penava (član povjerenstva)
Committee memberHrvoje Draganić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Technical Mechanics)
Osijek
Defense date and country2022-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
Ljuske su ploče koje posjeduju geometrijsku zakrivljenost i karakterizirane su membranskim ponašanjem kada su opterećene različitim djelovanjima. U praksi se ljuske često koriste pri izradi spremnika za tekućine. Tijekom proračuna promatrane su rotacijsko simetrične ljuske uslijed djelovanja hidrostatskog tlaka i drugih opterećenja. Promatrane ljuske su cilindričnog, sfernog i konusnog oblika. Za proračun ljusaka korišten je programski paket MATLAB. Kod cilindrične ljuske su proračunate membranske sile, te pomaci i kutovi zaokreta na gornjem i donjem rubu ljuske. Kod proračuna sfernih ljusaka proračunate su membranske sile i membranske deformacije pri promatranim opterećenjima. Kod proračuna konusnih ljusaka proračunate su membranske sile i membranske deformacije pri promatranim opterećenjima.
Abstract (english)
Shells are plates that have a geometric curvature and are characterized by a membrane behavior when they are loaded with different loads. In practice, shells are often used when constructing containers for liquids. During the calculations, rotationally symmetric shells were observed due to the effect of hydrostatic pressure and other loads. The observed shells are cylindrical, spherical and conical in shape. The MATLAB software package was used to calculate the shells. In the case of a cylindrical shell, membrane forces, displacements and angles of rotation at the upper and lower edges of the shell were calculated. When calculating the spherical shells, the membrane forces and membrane deformations at the observed loads were calculated. When calculating the conical shells, the membrane forces and membrane deformations at the observed loads were calculated.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:133:619847
Study programmeTitle: University graduate study in civil engineering; specializations in: Hydraulic engineering, Supporting structures, Construction management and technology, Transportation engineering
Course: Supporting structures
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-25 14:12:08