prikaz prve stranice dokumenta Proračun konstrukcije hangara za zrakoplove
Access restricted to students and staff of home institution
master's thesis
Proračun konstrukcije hangara za zrakoplove
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. urn:nbn:hr:133:227039
Andrijević, Ivan
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Materials and Structures

Institutional repository: Repository GrAFOS

Cite this document

Andrijević, I. (2022). Proračun konstrukcije hangara za zrakoplove (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:227039

Andrijević, Ivan. "Proračun konstrukcije hangara za zrakoplove." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:227039

Andrijević, Ivan. "Proračun konstrukcije hangara za zrakoplove." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:227039

Andrijević, I. (2022). 'Proračun konstrukcije hangara za zrakoplove', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:133:227039

Andrijević I. Proračun konstrukcije hangara za zrakoplove [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2022 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:133:227039

I. Andrijević, "Proračun konstrukcije hangara za zrakoplove", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:133:227039

Metadata
TitleProračun konstrukcije hangara za zrakoplove
Title (english)Design of steel aircraft hangar
AuthorIvan Andrijević
MentorDamir Markulak (mentor)
MentorTihomir Dokšanović (komentor)
Committee memberIvan Radić (predsjednik povjerenstva)
Committee memberDamir Markulak (član povjerenstva)
Committee memberTihomir Dokšanović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Materials and Structures)
Osijek
Defense date and country2022-09-29, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
Cilj diplomskog rada bio je dimenzionirati glavne i sekundarne elemente hangara za zrakoplove u Osijeku. Glavni okvir je rešetkasti dvozglobni okvir sastavljen od toplo i hladno predgotovljenih elemenata. Analiza opterećenja i dimenzioniranje provedeno je po pravilima Eurokod-a. Djelovanja na konstrukciju obuhvaćaju vlastitu težinu, snijeg i vjetar. Za dimenzioniranje elemenata korištene su najveće rezne sile iz mjerodavne kombinacije dobivene u programskom paketu Autodesk Robot Structural Analysis Professional 2022. Za pojasne elemente stupa i grede okvira odabran je hladno dogotovljeni šuplji kvadratni profil 150x150x4, za dijagonalnu ispunu toplo dogotovljeni šuplji kvadratni profil 90x90x4, a za okomitu ispunu toplo dogotovljeni šuplji kvadratni profil 50x50x3,2. Za podrožnicu je odabran toplo dogotovljeni šuplji pravokutni profil 150x100x4. Svi elementi izrađeni su od čelika S235. Za globalnu stabilizaciju korišteni su horizontalni i vertikalni vlačno – vlačni spregovi. Proračunom su zadovoljeni svi uvjeti nosivosti i uporabljivosti. Svi spojevi proračunati su u programskim paketima Autodesk Robot Structural Analysis Professional 2022 i IDEA Statica.
Abstract (english)
The aim of the thesis was to design main and seondary elements of steel hangar for airplanes in Osijek. Main frame is a two-hinged truss frame made of hot formed and cold formed elements. Load analysis and design was carried out according to Eurocode. Loads on construction include self weight, snow and wind. Maximum forces from proper combinations given in Autodesk Robot Structural Analysis Professional 2022 are used for the design of elements. Cold formed square hollow section 150x150x4 is selected for chord elements of the column and beam, hot formed square hollow section 90x90x4 is selected for diagonal web and hot formed square hollow section 50x50x3,2 is selected for vertical web. Hot formed rectangular hollow section 150x100x4 is selected for purlins. All elements are made of steel S235. For global stability, horizontal and vertikal tension only bracing system is used. The design has fulfilled all requirements for ultimate limit state and serviceability limit state. Connections are designed in Autodesk Robot Structrual Analysis Professional 2022 and IDEA Statica.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:133:227039
Study programmeTitle: University graduate study in civil engineering; specializations in: Hydraulic engineering, Supporting structures, Construction management and technology, Transportation engineering
Course: Supporting structures
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-25 15:04:23