prikaz prve stranice dokumenta Usporedba i analiza čelične i aluminijske hale
Access restricted to students and staff of home institution
master's thesis
Usporedba i analiza čelične i aluminijske hale
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. urn:nbn:hr:133:673121
Vrbić, Monika
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Materials and Structures

Institutional repository: Repository GrAFOS

Cite this document

Vrbić, M. (2022). Usporedba i analiza čelične i aluminijske hale (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:673121

Vrbić, Monika. "Usporedba i analiza čelične i aluminijske hale." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:673121

Vrbić, Monika. "Usporedba i analiza čelične i aluminijske hale." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:673121

Vrbić, M. (2022). 'Usporedba i analiza čelične i aluminijske hale', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:133:673121

Vrbić M. Usporedba i analiza čelične i aluminijske hale [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2022 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:133:673121

M. Vrbić, "Usporedba i analiza čelične i aluminijske hale", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:133:673121

Metadata
TitleUsporedba i analiza čelične i aluminijske hale
Title (english)Comparison and amalysis of a steel and aluminium hall
AuthorMonika Vrbić
MentorTihomir Dokšanović (mentor)
MentorIvan Radić (komentor)
Committee memberDamir Markulak (predsjednik povjerenstva)
Committee memberTihomir Dokšanović (član povjerenstva)
Committee memberIvan Radić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Materials and Structures)
Osijek
Defense date and country2022-12-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
Cilj diplomskog rada je odabir odgovarajućeg konstrukcijskog sustava, te dimenzioniranje čelične i aluminijske inačice hale. Analiza opterećenja i dimenzioniranje provedeno je u skladu s normama HRN EN 1993 i HRN EN 1999. Opterećenja uzeta u obzir, uz vlastitu težinu, su snijeg i vjetar. Analiza reznih sila na temelju unesenih kombinacija je rađena u programskom paketu Robot Structural Analysis 2019. Okvir čelične konstrukcije, stup i greda, izvedeni su s IPE 450 profilom, a podrožnica je izvedena kao toplo dogotovljeni pravokutni profil dimenzija 100/60/6 mm. Pri izradi aluminijske okvirne konstrukcije korišteni su vlastito osmišljeni profili za stup, gredu i podrožnice. Proračunom su zadovoljeni uvjeti graničnih stanja nosivosti i uporabljivosti čelične i aluminijske hale. Također, dan je i izvještaj o spojevima proračunatim pomoću Autodesk Robot Structural Analysis 2019.
Abstract (english)
The aim of the thesis is to select the appropriate structural system and design the steel and aluminum version of the hall. Load analysis and dimensioning was carried out in accordance with HRN EN 1993 and HRN EN 1999. Loads considered, in addition to own weight, are snow and wind. The analysis of forces and moments, based on the entered combinations was done in the program package Robot Structural Analysis 2019. The frame of the steel structure, the column, and the beam, were made with the IPE 450 profiles, and the purlin was made as a hot-finished rectangular profile with dimensions of 100/60/6 mm. When creating the aluminum frame structure, specially designed profiles for the column, beam and purlins were used. The calculation satisfies the conditions of the ultimate limit state and serviceability limit state of the steel and aluminum hall. Also, a report on joints calculated using Autodesk Robot Structural Analysis 2019 was given.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:133:673121
Study programmeTitle: University graduate study in civil engineering; specializations in: Hydraulic engineering, Supporting structures, Construction management and technology, Transportation engineering
Course: Supporting structures
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-12-08 08:29:35