prikaz prve stranice dokumenta Aluminijska montažna hala
Access restricted to students and staff of home institution
master's thesis
Aluminijska montažna hala
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. urn:nbn:hr:133:201672
Kujundžić, Nikolina
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Materials and Structures

Institutional repository: Repository GrAFOS

Cite this document

Kujundžić, N. (2022). Aluminijska montažna hala (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:201672

Kujundžić, Nikolina. "Aluminijska montažna hala." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:201672

Kujundžić, Nikolina. "Aluminijska montažna hala." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:201672

Kujundžić, N. (2022). 'Aluminijska montažna hala', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 14 November 2024, https://urn.nsk.hr/urn:nbn:hr:133:201672

Kujundžić N. Aluminijska montažna hala [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2022 [cited 2024 November 14] Available at: https://urn.nsk.hr/urn:nbn:hr:133:201672

N. Kujundžić, "Aluminijska montažna hala", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:133:201672

Metadata
TitleAluminijska montažna hala
Title (english)Prefabricated aluminium hall
AuthorNikolina Kujundžić
MentorTihomir Dokšanović (mentor)
Committee memberDamir Markulak (predsjednik povjerenstva)
Committee memberTihomir Dokšanović (član povjerenstva)
Committee memberIvan Radić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Materials and Structures)
Osijek
Defense date and country2022-12-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
Svrha ovog diplomskog rada je usporediti i dimenzionirati elemente montažne aluminijske hale na području grada Osijeka. Tlocrtne dimenzije hale su 15x25 m, visine 8,06 m do vrha sljemena s nagibom krova od 26°. Ista hala proračunata je na dva načina. Prvi način je proračun djelovanja HRN EN 1991 (trajne aluminijske konstrukcije), a drugi je proračun prema normi HRN EN 13782 (privremene konstrukcije – šatori). Obje konstrukcije su dimenzionirane prema HRN EN 1999. Za stupove i grede, u oba proračuna, korišteni su aluminijski profili s utorima za lakše montiranje PVC pokrova hale, a za podrožnice su korišteni šuplji pravokutni presjeci. Postavljanjem vertikalnih i horizontalnih spregova osigurana je prostorna stabilnost hale. Spregovi su kružnog poprečnog presjeka. Veći momenti savijanja na mjestima spajanja elemenata riješeni su izvedbom čeličnog umetka kvalitete čelika S235. Statička analiza i proračun su provedeni u programskom paketu Autodesk Robot Structural Analysis 2022.
Abstract (english)
The purpose of this thesis is to compare and design the elements of a prefabricated aluminium hall around the city of Osijek. The ground plan dimensions of the hall are 15x25 m, the height is 8.06 m to the top of the ridge with a roof slope of 26°. The same hall is calculated in two ways. The first method is the calculation of loads according to HRN EN 1991 (permanent aluminium structures), and the second is the calculation according to the HRN EN 13782 standard (temporary structures - tents). Both constructions are designed according to HRN EN 1999. Aluminium profiles with slots for easier mounting of the hall's PVC cover were used for the columns and beams, and hollow rectangular sections were used for the beams. By installing vertical and horizontal joints, the spatial stability of the hall is ensured. The couplings have a circular cross-section. Larger bending moments at the points of connection of elements are solved by the execution of a steel insert of S235 quality. The static analysis and calculation were performed in the Autodesk Robot Structural Analysis 2022 software package.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:133:201672
Study programmeTitle: University graduate study in civil engineering; specializations in: Hydraulic engineering, Supporting structures, Construction management and technology, Transportation engineering
Course: Hydraulic engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-12-08 08:32:29