prikaz prve stranice dokumenta Izračun unutrašnjih sila za trozglobni okvir i planovi pomaka
Access restricted to students and staff of home institution
undergraduate thesis
Izračun unutrašnjih sila za trozglobni okvir i planovi pomaka
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2023. urn:nbn:hr:133:962718
Vinković, Josip
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Technical Mechanics

Institutional repository: Repository GrAFOS

Cite this document

Vinković, J. (2023). Izračun unutrašnjih sila za trozglobni okvir i planovi pomaka (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:962718

Vinković, Josip. "Izračun unutrašnjih sila za trozglobni okvir i planovi pomaka." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2023. https://urn.nsk.hr/urn:nbn:hr:133:962718

Vinković, Josip. "Izračun unutrašnjih sila za trozglobni okvir i planovi pomaka." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2023. https://urn.nsk.hr/urn:nbn:hr:133:962718

Vinković, J. (2023). 'Izračun unutrašnjih sila za trozglobni okvir i planovi pomaka', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 14 November 2024, https://urn.nsk.hr/urn:nbn:hr:133:962718

Vinković J. Izračun unutrašnjih sila za trozglobni okvir i planovi pomaka [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2023 [cited 2024 November 14] Available at: https://urn.nsk.hr/urn:nbn:hr:133:962718

J. Vinković, "Izračun unutrašnjih sila za trozglobni okvir i planovi pomaka", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:133:962718

Metadata
TitleIzračun unutrašnjih sila za trozglobni okvir i planovi pomaka
Title (english)Calculation of inner forces for a three-hinged frame and projections of displacements
AuthorJosip Vinković
MentorAleksandar Jurić (mentor)
Committee memberSilva Lozančić (predsjednik povjerenstva)
Committee memberAleksandar Jurić (član povjerenstva)
Committee memberGoran Gazić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Technical Mechanics)
Osijek
Defense date and country2023-05-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Abstract
Završni rad je formiran u obliku dva zadatka. Za prvi zadatak je potrebno proračunati unutarnje sile, za trozglobni okvir, u zadanom presjeku n-n pomoću dvije metode. Prva metoda je određivanje unutarnjih sila iz uvjeta ravnoteže te njima dobivamo vrijedosti momenta, poprečne i uzdužne sile. Druga metoda je metoda virtualnog rada te u plan pomaka odredimo vrijedosti traženih parametara. Nakon toga potrebno je dobivene vrijednosti kontrolirati pomoću programa Autodesk Robot Structural Analysis. Za drugi zadatak je potrebno odrediti pomake točki C,D,E,F i G te kutove zaokreta tijela 2 i 3. drugi zadatak je, također kao i prvi, formiran kao trozglobni okvir ali kao mehanizam. Tražene parametre određujemo geometrijskim putem pomoću planova pomaka koje dobijemo određivanjem polova pomaka nakon čega slijedi konstruiranje plana pomaka. Geometrijske rezultate kontroliramo računskim putem.
Abstract (english)
This undergraduate thesis is structured as a two-task written work. The purpose of the first task was to calculate the internal forces of a fixed three-jointed frame in a given cross section n-n using the two methods. The first method was to determine the internal forces using the equilibrium conditions to get the momentum values and values of the transverse and longitudinal force. The second method used in this thesis was the virtual work method to determine the values of required parameters. Next step was to control the parameter values in the Autodesk Robot Structural Analysis software.The second task in this thesis was to determine the shifts of points C, D, E, F and G and to determine the angle of rotation for bodies 2 and 3. The second task was also formed as a three- jointed frame, but this time as a mechanism. The required parameters were defined geometrically using the shift plans which were determined by specifying the pole shifts, followed by shift plan construction. The geometric results were controlled and checked by calculations.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:133:962718
Study programmeTitle: Undergraduate university programme in civil engineering; specializations in: General course
Course: General course
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2023-07-04 08:41:25