prikaz prve stranice dokumenta Experimental analysis of the strength of a polymer produced from recycled material
  Download
PDF 687.75 KB
Scientific paper - Preliminary note / Short communication
Experimental analysis of the strength of a polymer produced from recycled material
Tehnički vjesnik, 18 (2011), 4; 627-631. urn:nbn:hr:133:546929
Jurić, Aleksandar; Štefić, Tihomir; Arbanas, Zlatko

Institutional repository: Repository GrAFOS

Cite this document

Jurić, A., Štefić, T. & Arbanas, Z. (2011). Experimental analysis of the strength of a polymer produced from recycled material. Tehnički vjesnik, 18. (4), 627-631. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:546929

Jurić, Aleksandar, et al. "Experimental analysis of the strength of a polymer produced from recycled material." Tehnički vjesnik, vol. 18, no. 4, 2011, pp. 627-631. https://urn.nsk.hr/urn:nbn:hr:133:546929

Jurić, Aleksandar, Tihomir Štefić and Zlatko Arbanas. "Experimental analysis of the strength of a polymer produced from recycled material." Tehnički vjesnik 18, no. 4 (2011): 627-631. https://urn.nsk.hr/urn:nbn:hr:133:546929

Jurić, A., Štefić, T. and Arbanas, Z. (2011) 'Experimental analysis of the strength of a polymer produced from recycled material', Tehnički vjesnik, 18(4), pp. 627-631. Available at: https://urn.nsk.hr/urn:nbn:hr:133:546929 (Accessed 28 November 2024)

Jurić A, Štefić T, Arbanas Z. Experimental analysis of the strength of a polymer produced from recycled material. Tehnički vjesnik [Internet]. 2011 December [cited 2024 November 28];18(4):627-631. Available at: https://urn.nsk.hr/urn:nbn:hr:133:546929

A. Jurić, T. Štefić and Z. Arbanas, "Experimental analysis of the strength of a polymer produced from recycled material", Tehnički vjesnik, vol. 18, no. 4, pp. 627-631, December 2011. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:133:546929. [Accessed: 28 November 2024]

Metadata
Title (english)Experimental analysis of the strength of a polymer produced from recycled material
Title (croatian)Eksperimentalna analiza nosivosti polimera dobivenog iz recikliranog materijala
AuthorAleksandar Jurić
AuthorTihomir Štefić
AuthorZlatko Arbanas
Author's institutionJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Abstract (english)
The subject of this paper is experimental testing of a polymer and definition of the idealised stress/strain diagram, from which the modulus of elasticity can be easily defined. The analysis was conducted on polymer straps made of ethylene polymer of high density (HDPE). In this case the polyethylene (PE) was produced almost entirely from recycled material and that defines its cost. PE generally has high density and very good mechanical characteristics and resistance to chemicals. As a material it is used in production of reservoirs and containers for various purposes. This paper is trying to define the basic characteristics of polymers by observing their tensile strength, to propose an idealised stress/strain diagram and to define the numerical values of the modulus of elasticity. Also the intention is to create a tool which would enable the definition of the stress / strain diagram for any similar material and broaden the application and use of such types of materials.
Abstract (croatian)
Predmet ovog rada je ispitivanje nosivosti polimera dobivenog iz recikliranog materijala i definiranje idealiziranog dijagrama naprezanje/deformacija, iz kojeg se lako može definirati modul elastičnosti. Analiza je provedena pomoću polimernih traka koje su izrađene od polimera etilena visoke gustoće (HDPE). U ovom slučaju polietilen (PE) je dobiven, gotovo u cijelosti, od recikliranog materijala, što u konačnici uvjetuje i njegovu cijenu. U pravilu je visoke gustoće i ima vrlo dobre mehaničke karakteristike i otpornost prema kemikalijama. Kao materijal prisutan je u proizvodnji rezervoara te posuda raznih namjena. U ovom radu nastoje se definirati osnovne karakteristike polimera kao materijala kroz rasteznu čvrstoću te predložiti idealizirani radni dijagram. Namjera je također kako bi ovaj rad postao alat kojim bi se mogao definirati dijagram naprezanje/deformacija za bilo koji drugi sličan materijal te otvoriti mogućnosti širokog spektra primjene.
Keywords (english)
Keywords (croatian)
Languageenglish
Publication typeScientific paper - Preliminary note / Short communication
Publication statusPublished
Peer reviewPeer review
Publication versionPublished version
Journal titleTehnički vjesnik
Numberingvol. 18, no. 4, pp. 627-631
p-ISSN1330-3651
e-ISSN1848-6339
URN:NBNurn:nbn:hr:133:546929
Publication2011-12
Document URLhttps://hrcak.srce.hr/75413
Type of resourceText
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2018-01-24 06:53:13