prikaz prve stranice dokumenta ISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A
No public access
master's thesis
ISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A
Zagreb: University of Zagreb, Faculty of Civil Engineering, 2023. urn:nbn:hr:237:814491
Ukalović, Viktorija
University of Zagreb
Faculty of Civil Engineering
Engineering Mechanics

Institutional repository: Repository of the Faculty of Civil Engineering, University of Zagreb

Cite this document

Ukalović, V. (2023). ISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A (Master's thesis). Zagreb: University of Zagreb, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:237:814491

Ukalović, Viktorija. "ISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A." Master's thesis, University of Zagreb, Faculty of Civil Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:237:814491

Ukalović, Viktorija. "ISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A." Master's thesis, University of Zagreb, Faculty of Civil Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:237:814491

Ukalović, V. (2023). 'ISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A', Master's thesis, University of Zagreb, Faculty of Civil Engineering, accessed 29 December 2024, https://urn.nsk.hr/urn:nbn:hr:237:814491

Ukalović V. ISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A [Master's thesis]. Zagreb: University of Zagreb, Faculty of Civil Engineering; 2023 [cited 2024 December 29] Available at: https://urn.nsk.hr/urn:nbn:hr:237:814491

V. Ukalović, "ISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A", Master's thesis, University of Zagreb, Faculty of Civil Engineering, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:237:814491

Metadata
TitleISPITIVANJE SAVIJANJEM U TRI TOČKE NA RAVNIM I ZAKRIVLJENIM UZORCIMA CIPP-A
Title (english)3-POINT BENDING TEST ON FLAT AND CURVED CIPP SPECIMENS
AuthorViktorija Ukalović
MentorAna Skender (mentor)
Committee memberMario Uroš (predsjednik povjerenstva)
Committee memberAna Skender (član povjerenstva)
Committee memberMarija Demšić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Civil Engineering
(Engineering Mechanics)
Zagreb
Defense date and country2023-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Abstract
Tema ovog rada su CIPP (eng. cured-in-place pipe) cijevi koje se koriste za sanaciju podzemnih netlačnih cjevovoda za odvodnju i kanalizaciju bez iskopa. Prikazano je laboratorijsko ispitivanje savojnih svojstava CIPP-a koje je provedeno u Laboratoriju za ispitivanje konstrukcija u Zavodu za tehničku mehaniku na Građevinskom fakultetu. Prikazani su rezultati i analiza podataka. Izrađeni su numerički modeli u računalnom programu Abaqus, koji prikazuju ispitivanje savijanjem u tri točke na ravnim i zakrivljenim uzorcima. Provedena je validacija numeričkog modela sa zakrivljenim uzorcima na temelju eksperimentalnih rezultata. Prema normi HRN EN ISO 11296-4 uspoređene su računske i numeričke vrijednosti savojnog modula. Provedena je analiza utjecaja geometrijskih karakteristika kod zakrivljenih i ravnih uzoraka.
Abstract (english)
The topic of this paper are cured-in-place pipes (CIPP) used for trenchless rehabilitation of underground non-pressure pipelines for drainage and sewage. The laboratory test of the flexural properties of CIPP, conducted in the Structural Testing Laboratory of the Department of Engineering Mechanics at the Faculty of Civil Engineering, is presented. The results and data analysis are presented. Numerical models, simulating the three-point bending test on flat and curved test pieces were created using the Abaqus software package. The numerical model with curved samples was validated based on the experimental results. According to the standard HRN EN ISO 11296-4, the calculated and numerical values of the flexural modulus were compared. An analysis of the influence of geometrical characteristics for flat and curved test pieces was performed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:237:814491
Study programmeTitle: Civil Engineering; specializations in: Construction Management, Transportation Engineering, Geotechnical Engineering, Hydraulic Engineering, Structural Engineering, Construction Materials, Theory and Modeling of Structures
Course: Construction Management
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-03-07 10:45:44