prikaz prve stranice dokumenta Analiza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona
No public access
master's thesis
Analiza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona
Zagreb: University of Zagreb, Faculty of Civil Engineering, 2020. urn:nbn:hr:237:657024
Ramljak, Antonio
University of Zagreb
Faculty of Civil Engineering
Construction Management

Institutional repository: Repository of the Faculty of Civil Engineering, University of Zagreb

Cite this document

Ramljak, A. (2020). Analiza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona (Master's thesis). Zagreb: University of Zagreb, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:237:657024

Ramljak, Antonio. "Analiza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona." Master's thesis, University of Zagreb, Faculty of Civil Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:237:657024

Ramljak, Antonio. "Analiza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona." Master's thesis, University of Zagreb, Faculty of Civil Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:237:657024

Ramljak, A. (2020). 'Analiza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona', Master's thesis, University of Zagreb, Faculty of Civil Engineering, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:237:657024

Ramljak A. Analiza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona [Master's thesis]. Zagreb: University of Zagreb, Faculty of Civil Engineering; 2020 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:237:657024

A. Ramljak, "Analiza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona", Master's thesis, University of Zagreb, Faculty of Civil Engineering, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:237:657024

Metadata
TitleAnaliza, planiranje i vizualizacija lanca opskrbe u BIM-u na projektu izgradnje industrijsko proizvodnog pogona
Title (english)Supply chain analysis, planning and visualization in BIM on the construction of industrial production facility project
AuthorAntonio Ramljak
MentorMladen Vukomanović (mentor)
Committee memberLana Lovrenčić Butković (predsjednik povjerenstva)
Committee memberMladen Vukomanović (član povjerenstva)
Committee memberIvica Završki (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Civil Engineering
(Construction Management)
Zagreb
Defense date and country2020-02-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Construction Organization and Technology
Abstract
U ovom su radu analizirani zahtjevi BIM modela za potrebe simulacije lanca opskrbe i izvedbe na gradilištu. Analizom literature vidljivo je kako su za izradu sheme gradilišta te simulaciju lanca opskrbe najprilagođeniji BIM softveri koji imaju funkcije za 4D modeliranje zbog toga što osim mogućnosti pozicioniranja 3D elementa koji predstavljaju opremu i resurse na gradilištu, imaju mogućnost povezivanja elementa modela s vremenskim planom. Nadalje, u radu su prikazani posebni zahtjevi koji se u projektu moraju zadovoljiti kako bi se simulacija lanca opskrbe mogla odviti, a to su odabir klasifikacije BIM elemenata, klasifikacije BIM svojstava, razine detaljnosti i razvijenost pojedinih elemenata (LOD). Pritom je najvažniji korak prilagodba svih navedenih elemenata zahtjevima projekta. Primjer simulacije lanca opskrbe napravljena je na projektu izvedbe proizvodne hale gdje je 3D model napravljen u softveru Allplan, proračun troškova i vremenski plan u softveru Gala dok se za 5D simulaciju i analizu lanca opskrbe koristio Synchro PRO. Odabrani primjer prikazuje način izrade sheme gradilišta te simulacije resursa u BIM okruženju.
Abstract (english)
This paper analyzes the requirements of the BIM model for simulation of supply chain and construction site performance. It is argued that BIM software are the most suitable for making construction scheme and supply chain simulation because of their 4D modeling functions. In addition to their ability to position 3D elements that represent equipment and resources on the site, they are able to link the model elements with the timeline. The paper also presents specific project requirements that must be met in order for supply chain simulation to take place, such as BIM element classification selection, BIM property classification, level od detail and development (LOD). The most important step is to adjust all aforementioned elements to project requirements. As an example of a supply chain simulation, a production hall design project is used. Its 3D model is made in Allplan software, timeframe and cost calculations in Gala software, while Synchro PRO is used for 5D simulation and supply chain analysis. The purpose of the given model is to show how to create a construction scheme and stimulate resources in a BIM-based environment.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:237:657024
Study programmeTitle: Civil Engineering; specializations in: Construction Management, Transportation Engineering, Geotechnical Engineering, Hydraulic Engineering, Structural Engineering, Construction Materials, Theory and Modeling of Structures
Course: Construction Management
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2020-02-26 11:28:29