prikaz prve stranice dokumenta Tipizacija aluminijskih hala za područje Republike Hrvatske
No public access
master's thesis
Tipizacija aluminijskih hala za područje Republike Hrvatske
Zagreb: University of Zagreb, Faculty of Civil Engineering, 2020. urn:nbn:hr:237:118520
Kumerle, Valentina
University of Zagreb
Faculty of Civil Engineering
Structures

Institutional repository: Repository of the Faculty of Civil Engineering, University of Zagreb

Cite this document

Kumerle, V. (2020). Tipizacija aluminijskih hala za područje Republike Hrvatske (Master's thesis). Zagreb: University of Zagreb, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:237:118520

Kumerle, Valentina. "Tipizacija aluminijskih hala za područje Republike Hrvatske." Master's thesis, University of Zagreb, Faculty of Civil Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:237:118520

Kumerle, Valentina. "Tipizacija aluminijskih hala za područje Republike Hrvatske." Master's thesis, University of Zagreb, Faculty of Civil Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:237:118520

Kumerle, V. (2020). 'Tipizacija aluminijskih hala za područje Republike Hrvatske', Master's thesis, University of Zagreb, Faculty of Civil Engineering, accessed 14 November 2024, https://urn.nsk.hr/urn:nbn:hr:237:118520

Kumerle V. Tipizacija aluminijskih hala za područje Republike Hrvatske [Master's thesis]. Zagreb: University of Zagreb, Faculty of Civil Engineering; 2020 [cited 2024 November 14] Available at: https://urn.nsk.hr/urn:nbn:hr:237:118520

V. Kumerle, "Tipizacija aluminijskih hala za područje Republike Hrvatske", Master's thesis, University of Zagreb, Faculty of Civil Engineering, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:237:118520

Metadata
TitleTipizacija aluminijskih hala za područje Republike Hrvatske
Title (english)Standardization of aluminium halls in the Republic of Croatia
AuthorValentina Kumerle
MentorDavor Skejić (mentor)
Committee memberDamir Lazarević (predsjednik povjerenstva)
Committee memberVlatka Rajčić (član povjerenstva)
Committee memberDavor Skejić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Civil Engineering
(Structures)
Zagreb
Defense date and country2020-02-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
Tema ovog rada je tipizacija aluminijskih montažnih hala s čeličnim umetkom s obzirom na različite zone djelovanja vjetra i snijega u Republici Hrvatskoj. Izrađena je dispozicija i proveden je proračun konstrukcije na mjerodavne zone opterećenja snijega i vjetra. Glavni nosivi sustav je dvozglobni okvir sa zategom. Analizirana je hala duljina 40 m, okvir raspona od 10, 12, 14, 16, 18 i 20 m i visine od 3,0, 4,5 i 6,0 m. Aluminijske prečke i stupovi su RHS profili 230x90x3 mm izrađeni iz legure AW 6005A , a na mjestima spojeva aluminijski profili su ojačani čeličnim RHS umetcima 180x80xt. Debljina stjenke čeličnog umetka varira od 3 do 6 mm uz klase čelika S235 ili S355. U analizi variraju i dužine čeličnih umetaka, u stupu od H/15 do H/5, a u prečki L/40 do L/10. Okvir je posebno provjeravan s profilima zatega RD 16 i CHS 101,6 x 4. Modeliranje i proračun okvira provedeno je u programu SCIA Engineer 19.1. Parametarske analize provedene su s obzirom na ujednačenost iskoristivosti mjerodavnih aluminijskih i čeličnih presjeka na temelju čega su dobivene optimalne duljine čeličnih umetaka za sve razmatrane geometrije okvira i zone djelovanja. Na temelju provedenih analiza predložena je preliminarna geometrija okvira i maksimalni razmaci između okvira koji mogu poslužiti za dosta precizno određivanje optimalne dispozicije aluminijskih hala u Republici Hrvatskoj.
Abstract (english)
The topic of this master thesis is standardization of aluminium prefabricated halls with steel insert considering different wind and snow loading zones in the Republic of Croatia. The disposition and design of the structure to the relevant snow and wind loading zones was performed. The main structural system is a double-hinged frame with a tie-element. Hall length of 40 m, frame spans of 10, 12, 14, 16, 18 and 20 m and heights of 3,0, 4,5 and 6,0 m were analysed. Aluminium beams and columns are RHS profiles 230x90x3 mm, with the joints reinforced with 180x80xt steel RHS inserts. The thickness of the steel insert varies from 3 to 6 mm and steel grade is S235 or S355. The lengths of the steel inserts also vary, from H/15 to H/5 in column, and L/40 to L/10 in the beam. The parametric analyses were performed regarding the uniform utilization of the relevant aluminium and steel sections, on the basis of which optimal lengths of steel inserts were obtained for all considered frame geometries and loading zones. Based on the performed analyses it is suggested that the preliminary geometry of the frames and the maximum distances between the frames can serve to precisely determine the optimal disposition of aluminium halls in the Republic of Croatia.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:237:118520
Study programmeTitle: Civil Engineering; specializations in: Construction Management, Transportation Engineering, Geotechnical Engineering, Hydraulic Engineering, Structural Engineering, Construction Materials, Theory and Modeling of Structures
Course: Structural Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2020-03-04 07:24:16