prikaz prve stranice dokumenta Određivanje materijalnih parametara uzoraka dobivenih 3D printanjem
Access restricted to students and staff of home institution
undergraduate thesis
Određivanje materijalnih parametara uzoraka dobivenih 3D printanjem
Rijeka: University of Rijeka, Faculty of Civil Engineering, 2021. urn:nbn:hr:157:765845
Dekleva, Davide
University of Rijeka
Faculty of Civil Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Civil Engineering

Cite this document

Dekleva, D. (2021). Određivanje materijalnih parametara uzoraka dobivenih 3D printanjem (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:157:765845

Dekleva, Davide. "Određivanje materijalnih parametara uzoraka dobivenih 3D printanjem." Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:157:765845

Dekleva, Davide. "Određivanje materijalnih parametara uzoraka dobivenih 3D printanjem." Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:157:765845

Dekleva, D. (2021). 'Određivanje materijalnih parametara uzoraka dobivenih 3D printanjem', Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, accessed 01 December 2024, https://urn.nsk.hr/urn:nbn:hr:157:765845

Dekleva D. Određivanje materijalnih parametara uzoraka dobivenih 3D printanjem [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Civil Engineering; 2021 [cited 2024 December 01] Available at: https://urn.nsk.hr/urn:nbn:hr:157:765845

D. Dekleva, "Određivanje materijalnih parametara uzoraka dobivenih 3D printanjem", Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:157:765845

Metadata
TitleOdređivanje materijalnih parametara uzoraka dobivenih 3D printanjem
Title (english)Determination of Material Properties of 3D Printed Samples
AuthorDavide Dekleva
MentorEdita Papa Dukić (mentor)
Committee memberEdita Papa Dukić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Civil Engineering
Rijeka
Defense date and country2021-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Technical Mechanics (Mechanics of Rigid and Deformable Bodies)
Abstract
Na početku rada opisujemo materijale (PLA) koje ćemo koristiti kao uzorke u našim ispitivanjima. Cilj ispitivanja je odrediti njihova svojstva materijala, točnije modul elastičnosti te zatim Poissonov koeficijent. Uzorke ćemo printati prema normi ISO 3167 sa printerom Prusa I3 MK3. Isprintane uzorke ćemo provesti kroz vlačna ispitivanja. Koristit će se kidalica Zwick 600. Istovremeno snimat ćemo površinske deformacije sa optičkim mjernim sustavom GOM Aramis. Po završetku određivanja parametara materijala, isprintat ćemo ispitne uzorke za auksetične materijale te ih također provesti kroz vlačna ispitivanja u kidalici Zwick 600 uz snimanje optičkog mjernog sustava GOM Aramis. Nakon dovršenog ispitivanja odrediti ćemo materijalne parametre za auksetične materijale.
Abstract (english)
In the beginning of the paper the material samples (PLA), which will be used in the analysis, are described. The goal of the examinations is to define material properties of used samples, more precisely determine its Poisson's ratio and modulus of elasticity. 3D samples will be printed according to norm ISO 3167 on printer Prusa I3 MK3. Printed samples will be carried out through tensile test. Testing is performed using testing machine Zwick 600. In the same time surface deformations will be recorded by optical measurement system GOM Aramis. Finishing the analysis material parameters are determined. Afterwards, 3D samples will be printed for auxetic materials which also will be carried out through tensile testing in testing machine Zwick 600 with the recording of Aramis optical measurement system. Upon completion of the examination the material parameters are determined.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:157:765845
ProjectNumber: IP-2018-01-1732
Title: Koncept nepomičnog pola u numeričkom modeliranju Cosseratovog kontinuuma
Acronym: FIMCOS
Leader: Gordan Jelenić
Jurisdiction: Croatia
Funder: HRZZ
Funding stream: IP
ProjectNumber: RC.2.2.06-0001
Title: Razvoj istraživačke infrastrukture na kampusu Sveučilišta u Rijeci
Leader: Nevenka Ožanić
Jurisdiction: Croatia
Funder: EFRR, MZO
Study programmeTitle: Civil Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-29 10:48:38