prikaz prve stranice dokumenta Utjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge
Access restricted to students and staff of home institution
undergraduate thesis
Utjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge
Rijeka: University of Rijeka, Faculty of Civil Engineering, 2022. urn:nbn:hr:157:344478
Cukon, Carla
University of Rijeka
Faculty of Civil Engineering
Department of Load Bearing Structures and Technical Mechanics
Chair of Technical Mechanics

Institutional repository: Repository of the University of Rijeka, Faculty of Civil Engineering

Cite this document

Cukon, C. (2022). Utjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:157:344478

Cukon, Carla. "Utjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge." Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:157:344478

Cukon, Carla. "Utjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge." Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:157:344478

Cukon, C. (2022). 'Utjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge', Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, accessed 17 February 2025, https://urn.nsk.hr/urn:nbn:hr:157:344478

Cukon C. Utjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Civil Engineering; 2022 [cited 2025 February 17] Available at: https://urn.nsk.hr/urn:nbn:hr:157:344478

C. Cukon, "Utjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge", Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:157:344478

Metadata
TitleUtjecaj 3D printanih dijagonalnih elemenata na dinamički odgovor jednostavnog modela na pobudu podloge
AuthorCarla Cukon
MentorNina Čeh (mentor)
Committee memberNina Čeh (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Civil Engineering
(Department of Load Bearing Structures and Technical Mechanics)
(Chair of Technical Mechanics)
Rijeka
Defense date and country2022-09-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
U ovom radu promatra se reakcija okvira na potresnu pobudu. Promatrana su tri jednaka jednokatna modela okvira od kojih je jedan bez dijagonalnih štapova, dok druga dva dodane imaju dijagonalne štapove različitih promjera. Eksperiment se odvijao u Laboratoriju za konstrukcije Građevinskog fakulteta u Rijeci. Potresna pobuda izvodila se na potresnom stolu Quanser ST-III, a eksperiment je snimljen optičkim mjernim sustavom GOM mbH PONTOS 3D 4M. Usporedbom dobivenih rezultata zaključeno je da dijagonalni štapovi povećavaju prigušenje okvira, a smanjuju pomake okvira, te time doprinose dinamičkom odgovoru takve konstrukcije na potresnu pobudu.
Abstract (english)
This undergraduate thesis deals with the dynamic response of single-storey frame to seismic excitation. Three single-storey frame models are used, where one of them is without diagonal rods, while the other two have diagonal rods with different diameters attached to them. All experiments were conducted in the Structural laboratory at the Faculty of Civil Engineering in Rijeka. Furthermore, seismic excitation is simulated via the Quanser ST-III seismic platform and monitored using the GOM mbH PONTOS 3D 4M system. Based on the comparison between the results obtained for the three different models, it is concluded that the diagonal rods increase the damping, while they decrease the frame displacements. This contributes to the dynamic response of the frame during seismic excitation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:157:344478
Study programmeTitle: Civil Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-09-28 13:21:57