prikaz prve stranice dokumenta Eksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija
Access restricted to students and staff of home institution
undergraduate thesis
Eksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija
Rijeka: University of Rijeka, Faculty of Civil Engineering, 2022. urn:nbn:hr:157:207335
Prekpaljaj, Matilda
University of Rijeka
Faculty of Civil Engineering
Department of Load Bearing Structures and Technical Mechanics
Chair of Technical Mechanics

Institutional repository: Repository of the University of Rijeka, Faculty of Civil Engineering

Cite this document

Prekpaljaj, M. (2022). Eksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:157:207335

Prekpaljaj, Matilda. "Eksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija." Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:157:207335

Prekpaljaj, Matilda. "Eksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija." Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:157:207335

Prekpaljaj, M. (2022). 'Eksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija', Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:157:207335

Prekpaljaj M. Eksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Civil Engineering; 2022 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:157:207335

M. Prekpaljaj, "Eksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija", Undergraduate thesis, University of Rijeka, Faculty of Civil Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:157:207335

Metadata
TitleEksperimentalno određivanje materijalnog modela plastičnog ponašanja aluminija
Title (english)Experimental Determination of the Material Model of Plastic Behaviour of Aluminium
AuthorMatilda Prekpaljaj
MentorLeo Škec (mentor)
Committee memberLeo Škec (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Civil Engineering
(Department of Load Bearing Structures and Technical Mechanics)
(Chair of Technical Mechanics)
Rijeka
Defense date and country2022-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Technical Mechanics (Mechanics of Rigid and Deformable Bodies)
Abstract
Tijekom istraživačkog projekta u kojem su se provela ispitivanja na lijepljenim aluminijskim spojevima, dogodilo se neočekivano plastificiranje aluminija. U ovom završnom radu detaljnije će se istražiti elastoplastično ponašanje aluminija te odrediti ključne parametre koje ga opisuju. Provest će se niz eksperimenata u 3 faze. U prvoj fazi će se uzorci aluminija jednoosno vlačno opteretiti do sloma dok će se u sljedeće dvije faze isti uzorci ciklički opterećivati i rasterećivati. U drugoj fazi aluminij će se najprije opteretiti vlačno, a u trećoj tlačno. Cilj je na temelju rezultata eksperimenata tj. radnih dijagrama svakog uzorka, odrediti parametre aluminija koji će se potom koristiti za bilinearni materijalni model. Algoritam koji opisuje bilinearni model sastoji se od više funkcija naprezanja u ovisnosti deformacije te za zadanu trenutnu deformaciju računa naprezanje u odnosu na naprezanje i deformaciju u prethodnom koraku. Ovakvim bilinearnim modelom će se aproksimirati materijalno ponašanje aluminija u numeričkim simulacijama za raslojavanje lijepljenih aluminijskih spojeva.
Abstract (english)
During a research project in which tests on adhesively bonded aluminium joints were performed, unexpected yielding of aluminium occurred. In this undergraduate thesis, elasto-plastic behaviour of aluminium will be investigated in detail and the key parameters that define it will be determined. A series of experiment will be performed in three phases. In the first phase, aluminium specimens will be uniaxially loaded in tension, while in the remaining two phases the same specimens will be cyclically loaded and unloaded. In the second phase, aluminium will be first loaded in tension, whereas in the third phase it will be first loaded in compression. Based on the experimental results, i.e. the strain-stress curves for each specimen, the goal is determining the parameters of aluminium, which later will be used for a bi-linear material model. The algorithm that describes the bi-linear model is composed on several stress functions that are dependent on the stress and strain in the previous step. This bi-linear model will be used to approximate the material behaviour of aluminium in numerical simulations of delamination of adhesively bonded aluminium joints.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:157:207335
ProjectNumber: IP-2016-06-4775
Title: Metoda usvojenih deformacija za konačne elemente slojevitih ploča i ljuski i njena primjena na probleme delaminacije
Title: Assumed strain method in finite elements for layered plates and shells with application on layer delamination problem
Acronym: ASDEL
Leader: Dragan Ribarić
Jurisdiction: Croatia
Funder: HRZZ
Funding stream: IP
Study programmeTitle: Civil Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-04 12:16:36