prikaz prve stranice dokumenta Dimenzioniranje čelične konstrukcije proizvodnog pogona
  Download
PDF 6.75 MB
master's thesis
Dimenzioniranje čelične konstrukcije proizvodnog pogona
Rijeka: University of Rijeka, Faculty of Civil Engineering, 2023. urn:nbn:hr:157:276206
Ivković, Marin
University of Rijeka
Faculty of Civil Engineering
Department of Load Bearing Structures and Technical Mechanics
Chair of Load Bearing Structures

Institutional repository: Repository of the University of Rijeka, Faculty of Civil Engineering

Cite this document

Ivković, M. (2023). Dimenzioniranje čelične konstrukcije proizvodnog pogona (Master's thesis). Rijeka: University of Rijeka, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:157:276206

Ivković, Marin. "Dimenzioniranje čelične konstrukcije proizvodnog pogona." Master's thesis, University of Rijeka, Faculty of Civil Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:157:276206

Ivković, Marin. "Dimenzioniranje čelične konstrukcije proizvodnog pogona." Master's thesis, University of Rijeka, Faculty of Civil Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:157:276206

Ivković, M. (2023). 'Dimenzioniranje čelične konstrukcije proizvodnog pogona', Master's thesis, University of Rijeka, Faculty of Civil Engineering, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:157:276206

Ivković M. Dimenzioniranje čelične konstrukcije proizvodnog pogona [Master's thesis]. Rijeka: University of Rijeka, Faculty of Civil Engineering; 2023 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:157:276206

M. Ivković, "Dimenzioniranje čelične konstrukcije proizvodnog pogona", Master's thesis, University of Rijeka, Faculty of Civil Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:157:276206

Metadata
TitleDimenzioniranje čelične konstrukcije proizvodnog pogona
Title (english)Design of the Steel Structure of the Production Facility
AuthorMarin Ivković
MentorMladen Bulić (mentor)
Committee memberPaulo Šćulac (predsjednik povjerenstva)
Committee memberPaulina Krolo (član povjerenstva)
Committee memberMladen Bulić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Civil Engineering
(Department of Load Bearing Structures and Technical Mechanics)
(Chair of Load Bearing Structures)
Rijeka
Defense date and country2023-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
U ovom diplomskom radu provedena je analiza i dimenzioniranje elemenata čelične konstrukcije proizvodnog pogona smještenog u Puli prema Eurocode-u 3, HRN EN 1993. Konstrukcija je simetrična, tlocrtnih dimenzija 60 x 33,6 m sa višestrešnim krovom nagiba 8°. Visina hale u sljemenu iznosi 11 m, a na krajevima i u sredini 12,18 m. Analiza konstrukcije provedena je za stalno i promjenjivo djelovanje prema Eurocode-u 1 i pripadnim nacionalnim dodacima za Hrvatsku. U promjenjivo djelovanje uračunate su i dizalice različitih nosivosti (od 5 i 16 tona) koje uzduž hale klize po kranskoj stazi. Statička analiza i dimenzioniranje provedeno je u programu Robot Structural Analysis Professional na granično stanje nosivosti (GSN) i granično stanje uporabivosti (GSU). Provedeno je dimenzioniranje karakterističnih spojeva konstrukcije: priključak stupa i grednog nosača, priključak nosača u sljemenu te priključak stupa na temelj.
Abstract (english)
In this thesis, the analysis and dimensioning of the elements of the steel structure of the production facility located in Pula was carried out according to Eurocode 3, HRN EN 1993. The structure is symmetrical, with floor plan dimensions of 60 x 33,6 m with a multi-roofed roof with an 8° slope. The height of the hall in the ridge is 11 m, and at the ends and in the middle 12,18 m. The structural analysis was carried out for constant and variable action according to Eurocode 1 and the corresponding national supplements for Croatia. Cranes of different capacities (of 5 and 16 tons) that slide along the hall along the crane track are also included in the variable operation. The static analysis and dimensioning was carried out in the Robot Structural Analysis Professional program for the load limit state and serviceability limit state . The dimensioning of the characteristic joints of the structure was carried out: the connection of the column and the beam support, the connection of the support in the ridge and the connection of the column to the foundation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:157:276206
Study programmeTitle: University graduate study of Civil Engineering; specializations in: Geotechnical Engineering, Hydraulic Engineering, Engineering Modelling of Structures, Structures, Transportation Engineering, Urban Engineering
Course: Structures
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni magistar inženjer građevinarstva/sveučilišna magistra inženjerka građevinarstva (sveučilišni magistar inženjer građevinarstva/sveučilišna magistra inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-10-19 09:32:42