prikaz prve stranice dokumenta Idejno rješenje marine u Novalji
Access restricted to students and staff of home institution
master's thesis
Idejno rješenje marine u Novalji
Rijeka: University of Rijeka, Faculty of Civil Engineering in Rijeka, 2018. urn:nbn:hr:157:851468
Dika, Matija
University of Rijeka
Faculty of Civil Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Civil Engineering

Cite this document

Dika, M. (2018). Idejno rješenje marine u Novalji (Master's thesis). Rijeka: University of Rijeka, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:157:851468

Dika, Matija. "Idejno rješenje marine u Novalji." Master's thesis, University of Rijeka, Faculty of Civil Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:157:851468

Dika, Matija. "Idejno rješenje marine u Novalji." Master's thesis, University of Rijeka, Faculty of Civil Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:157:851468

Dika, M. (2018). 'Idejno rješenje marine u Novalji', Master's thesis, University of Rijeka, Faculty of Civil Engineering, accessed 30 December 2024, https://urn.nsk.hr/urn:nbn:hr:157:851468

Dika M. Idejno rješenje marine u Novalji [Master's thesis]. Rijeka: University of Rijeka, Faculty of Civil Engineering; 2018 [cited 2024 December 30] Available at: https://urn.nsk.hr/urn:nbn:hr:157:851468

M. Dika, "Idejno rješenje marine u Novalji", Master's thesis, University of Rijeka, Faculty of Civil Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:157:851468

Metadata
TitleIdejno rješenje marine u Novalji
Title (english)Design of the yacht marina in Novalja
AuthorMatija Dika
MentorIgor Ružić (mentor)
MentorNino Krvavica (mentor)
Committee memberElvis Žic (predsjednik povjerenstva)
Committee memberGoran Volf (član povjerenstva)
Committee memberIgor Ružić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Civil Engineering
Rijeka
Defense date and country2018-11-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Hydrotechnology
Abstract
U ovome diplomskom radu opisane su prirodne osnove lokacije i valovi koji se razvijaju pri djelovanju vjetra iz dominantnih smjerova. Opisana je metodologija proračuna nasutog i vertikalnog lukobrana, obalnog zida, dispozicije vezova te plovnih puteva unutar marine. Također su opisane refleksija i transmisija valova na lukobranima i načini za njihovo umanjenje. Proveden je proračun potrebnih dimenzija za privez brodova za krstarenje – kruzera. Potrebnih dubina, prostora za manevriranja, sila koje nastaju pri udaru broda prilikom pristajanja i onih u užadi koje nastaju od vjetra. Dimenzionirani su nasuti i vertikalni lukobran na maksimalni val koji nastaje iz smjera vjetra WSW. Na kraju su opisane tri varijante rješenja, za svaku od njih navedenu su prednosti i mane te je na kraju obrazloženo koja varijanta je najbolja. Za odabranu varijantu izrađeni su karakteristični poprečni presjeci, situacijski položaj lukobrana i iskaz masa.
Abstract (english)
This paper describes natural foundations of the location and waves that are developing when the wind from dominant directions is blowing. The calculation method for rubble-mound and vertical breakwaters, coastal wall, berths arrangement and waterways are described. Transmission and reflection on vertical beakwaters are also described and ways to reduce them. The calculation of required dimensions for cruise liner mooring was carried out. Required depths, room for maneuvering, forces that arise during the impact of the ship and the ones in ropes caused by wind. Rubble-mound and vertical breakwaters are dimensioned to the maximum wave generated from the WSW wind direction. Finally, three variants of the solution are described, for each of them the advantages and disadvantages mentioned, and in the end it is explained which variant is the best. For the selected variant, characteristic cross section, situational position of the breakwater and mass representation were made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:157:851468
Study programmeTitle: Civil Engineering; specializations in: Geotechnical Engineering, Hydraulic Engineering, Engineering Modelling, Structural Engineering, Transportation Engineering, Urban Engineering
Course: Structural Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-11-28 11:38:57