prikaz prve stranice dokumenta Usporedba proračuna prednapetog pravokutnog i T-presjeka
Access restricted to students and staff of home institution
master's thesis
Usporedba proračuna prednapetog pravokutnog i T-presjeka
Rijeka: University of Rijeka, Faculty of Civil Engineering, 2020. urn:nbn:hr:157:278242
Gambaletta, Diego
University of Rijeka
Faculty of Civil Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Civil Engineering

Cite this document

Gambaletta, D. (2020). Usporedba proračuna prednapetog pravokutnog i T-presjeka (Master's thesis). Rijeka: University of Rijeka, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:157:278242

Gambaletta, Diego. "Usporedba proračuna prednapetog pravokutnog i T-presjeka." Master's thesis, University of Rijeka, Faculty of Civil Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:157:278242

Gambaletta, Diego. "Usporedba proračuna prednapetog pravokutnog i T-presjeka." Master's thesis, University of Rijeka, Faculty of Civil Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:157:278242

Gambaletta, D. (2020). 'Usporedba proračuna prednapetog pravokutnog i T-presjeka', Master's thesis, University of Rijeka, Faculty of Civil Engineering, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:157:278242

Gambaletta D. Usporedba proračuna prednapetog pravokutnog i T-presjeka [Master's thesis]. Rijeka: University of Rijeka, Faculty of Civil Engineering; 2020 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:157:278242

D. Gambaletta, "Usporedba proračuna prednapetog pravokutnog i T-presjeka", Master's thesis, University of Rijeka, Faculty of Civil Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:157:278242

Metadata
TitleUsporedba proračuna prednapetog pravokutnog i T-presjeka
Title (english)Comparison of design prestressed rectangular and T-section
AuthorDiego Gambaletta
MentorŽeljko Smolčić (mentor)
Committee memberPaulo Šćulac (predsjednik povjerenstva)
Committee memberDavor Grandić (član povjerenstva)
Committee memberŽeljko Smolčić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Civil Engineering
Rijeka
Defense date and country2020-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
Prednapete betonske konstrukcije su spreg betona, čelika za armiranje i čelika za prednapinjanje. Primjenjuju se kod građevina gdje se želi izbjeći pojava pukotina, povećati nosivost, smanjiti deformabilnost itd., a posebnu ulogu imaju kod građevina velikog raspona. Osnovna ideja prednapinjanja proizlazi iz toga da se, prije vanjskog opterećenja, umjetnim načinom beton dovede u takvo stanje naprezanja gdje će u preuzimanju napona od uporabnog opterećenja sudjelovati cijeli betonski presjek. U ovom radu je proveden postupak dimenzioniranja i proračuna prednapetog krovnog nosača „T“ presjeka i pravokutnog presjeka i, na poslijetku, usporedba dobivenih rezultata. Dokazuje se opravdanost upotrebe nosača „T“ presjeka, te iznose preporuke za daljnja istraživanja. Cijeli proračun je proveden prema normi za proračun prednapetih elemenata EN 1992.
Abstract (english)
Prestressed concrete is compound of concrete, reinforcing steel and prestressing steel. It applies to buildings where it is necessary to avoid cracking, increase the bearing capacity, reduce deformability etc., and it's mostly applied to large-scale building. The basic idea of prestressing is using artifical way to bring concrete to such a state of stress where the whole concrete section will take part in the take-over of the load, after an external load has been applied. This paper compares the use of „T“ and rectangular prestressed roof beam of a production hall. In the end, it is proven that the use of „T“ beam is justifable and recommendations for further research are given. Entire analysis was performed in accordance with the standard for calculating prestressed elements EN 1992.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:157:278242
Study programmeTitle: Civil Engineering; specializations in: Geotechnical Engineering, Hydraulic Engineering, Engineering Modelling, Structural Engineering, Transportation Engineering, Urban Engineering
Course: Structural Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-11-30 13:54:08