prikaz prve stranice dokumenta Proračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata
  Download
PDF 4.04 MB
master's thesis
Proračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata
diplomski rad
Split: University of Split, Faculty of Civil Engineering, Architecture and Geodesy, 2021. urn:nbn:hr:123:783614
Baković, Mijo
University of Split
Faculty of Civil Engineering, Architecture and Geodesy
Department of Hydromechanics and Hydraulics

Institutional repository: FCEAG Repository

Cite this document

Baković, M. (2021). Proračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata : diplomski rad (Master's thesis). Split: University of Split, Faculty of Civil Engineering, Architecture and Geodesy. Retrieved from https://urn.nsk.hr/urn:nbn:hr:123:783614

Baković, Mijo. "Proračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata : diplomski rad." Master's thesis, University of Split, Faculty of Civil Engineering, Architecture and Geodesy, 2021. https://urn.nsk.hr/urn:nbn:hr:123:783614

Baković, Mijo. "Proračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata : diplomski rad." Master's thesis, University of Split, Faculty of Civil Engineering, Architecture and Geodesy, 2021. https://urn.nsk.hr/urn:nbn:hr:123:783614

Baković, M. (2021). 'Proračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata : diplomski rad', Master's thesis, University of Split, Faculty of Civil Engineering, Architecture and Geodesy, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:123:783614

Baković M. Proračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata : diplomski rad [Master's thesis]. Split: University of Split, Faculty of Civil Engineering, Architecture and Geodesy; 2021 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:123:783614

M. Baković, "Proračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata : diplomski rad", Master's thesis, University of Split, Faculty of Civil Engineering, Architecture and Geodesy, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:123:783614

Metadata
TitleProračun procjeđivanja vode kroz nasip s drenom metodom konačnih elemenata : diplomski rad
Title (english)Analysis of Water Leakage through the Embankment with Drainage by the Finite Element Method : Master's Thesis
AuthorMijo Baković
MentorDavor Bojanić (mentor)
Committee memberDavor Bojanić (predsjednik povjerenstva)
Committee memberIvo Andrić (član povjerenstva)
Committee memberAlen Harapin (član povjerenstva)
GranterUniversity of Split
Faculty of Civil Engineering, Architecture and Geodesy
(Department of Hydromechanics and Hydraulics)
Split
Defense date and country2021-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Hydrotechnology
Abstract
U ovom diplomskom radu prikazane su dvije varijante rješenja procjeđivanja vode kroz nasip. Prva varijanta je nasip s pojavom vrelne plohe. Druga varijanta je izrada nasipa sa drenažnim dodatkom nasipa na nizvodnoj strani nasipa. Nasip je trajno opterećen hidrostatskim tlakom s jedne strane. Numerička metoda modeliranja koja je korištena za analizu vode u nasipu je metoda konačnih elemenata. Primijenjeni su trokutni konačni elementi, proveden je proračun matrice vodljivosti G^e, zadani su rubni uvjeti, te je proveden izračun potencijala, odnosno vrijednosti strujne funkcije. Model je izrađen u programskom jeziku FORTRAN95. Prvo je pretpostavljen položaj gornje rubne strujnice (slobodno vodno lice), a nakon što je dobiveno programsko rješenje, strujnica slobodnog vodnog lica prilagođena je rješenju. Postupak se ponavlja dok razlika između pretpostavljene i dobivene strujnice slobodnog vodnog lica ne bude manja od 2 (mm).
Abstract (english)
In this diploma thesis, two variants of the solution of water seepage through the embankment are presented. The first variant is an embankment with the appearance of a boiling surface. Another variant is the construction of an embankment with a drainage addition of the embankment on the downstream side of the embankment. The embankment is permanently loaded with hydrostatic pressure on one side. The numerical modeling method used to analyze the water in the embankment is the finite element method. Triangular finite elements were applied, the conductivity matrix G ^ e was calculated, boundary conditions were given, and the calculation of the potential, ie the value of the current function, was performed. The model is made in the FORTRAN95 programming language. First, the position of the upper edge stream (free water face) was assumed, and after the software solution was obtained, the free water face stream was adjusted to the solution. The procedure is repeated until the difference between the assumed and the obtained free water face stream is less than 2 (mm).
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:123:783614
Study programmeTitle: Civil Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public notePredmet: Hidraulika
Created on2021-11-05 13:58:43