prikaz prve stranice dokumenta Usporedba različitih planova primjena na pošiljkama grafičkih proizvoda
No public access
master's thesis
Usporedba različitih planova primjena na pošiljkama grafičkih proizvoda
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2013. urn:nbn:hr:216:448209
Filipović, Igor
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Filipović, I. (2013). Usporedba različitih planova primjena na pošiljkama grafičkih proizvoda (Master's thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:448209

Filipović, Igor. "Usporedba različitih planova primjena na pošiljkama grafičkih proizvoda." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2013. https://urn.nsk.hr/urn:nbn:hr:216:448209

Filipović, Igor. "Usporedba različitih planova primjena na pošiljkama grafičkih proizvoda." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2013. https://urn.nsk.hr/urn:nbn:hr:216:448209

Filipović, I. (2013). 'Usporedba različitih planova primjena na pošiljkama grafičkih proizvoda', Master's thesis, University of Zagreb, Faculty of Graphic Arts, accessed 18 August 2024, https://urn.nsk.hr/urn:nbn:hr:216:448209

Filipović I. Usporedba različitih planova primjena na pošiljkama grafičkih proizvoda [Master's thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2013 [cited 2024 August 18] Available at: https://urn.nsk.hr/urn:nbn:hr:216:448209

I. Filipović, "Usporedba različitih planova primjena na pošiljkama grafičkih proizvoda", Master's thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2013. Available at: https://urn.nsk.hr/urn:nbn:hr:216:448209

Metadata
TitleUsporedba različitih planova primjena na pošiljkama grafičkih proizvoda
AuthorIgor Filipović
MentorDiana Milčić (mentor)
Committee memberDiana Milčić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2013-11-5, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
Planovi prijema koriste se za statističku kontrolu pošiljki. Bazirani su na AQL-u. Kvaliteta se ocjenjuje preko postotka nesukladnih jedinica. Ako nije zadovoljavajuća pošiljka se ne prihvaća. Kada se radi o nizu pošiljki postotak nesukladnih nešto će varirati, tako da pojam AQL odgovara prosjeku postotka nesukladnih u nizu. Generator postotka nesukladnih u pošiljci je proizvodna tolerancija. Simulacija prihvaćanja niza pošiljki i pripadne OC-krivulje pokazuju da dok je prijem pošiljki oko 95%, planovi su primjenjivi na grafičke proizvode. Kada vjerojatnost prihvaćanja padne ispod 90% planovi prijema postaju neprecizni. OC krivulje govore da je to zbog postotka nesukladnih jedinica. Sa rastom postotka nesukladnih, pada vjerojatnost prijema, međutim pada i preciznost planova, koji su baždareni samo za visoki prijem pošiljki.
Abstract (english)
Sampling procedures are used for statistical control of shipments. They are based on AQL. Quality is graded by percentage of non-conforming units. If not satisfactory shipment is not accepted. When working on, a number of non-conforming shipments percentage will vary slightly, so that the concept of AQL corresponds to the average percentage of non-conforming in order. Manufacturing tolerances are the generator of non-conforming units in the shipment. Simulation of accepting on a series of shipments and associated OC-curves, showed that plans are applicable to the graphics products while acceptance probability are approximately 95%. When acceptance probability drops below 90%, sampling procedures become imprecise. OC-curves suggest that this is due to the percentage of non - conforming units. The probability of acceptance falling down with an increase in the percentage of non-conforming units. The accuracy of plans also falling down. They are calibrated only for high reception shipments.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:448209
Study programmeTitle: Graphic technology; specializations in: Graphic technology, Design of graphic products
Course: Graphic technology
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-17 08:59:29