prikaz prve stranice dokumenta Primjena 3D tiska u dizajnu ambalaže
No public access
master's thesis
Primjena 3D tiska u dizajnu ambalaže
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2010. urn:nbn:hr:216:578953
Odobašić, Marijana
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Odobašić, M. (2010). Primjena 3D tiska u dizajnu ambalaže (Master's thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:578953

Odobašić, Marijana. "Primjena 3D tiska u dizajnu ambalaže." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2010. https://urn.nsk.hr/urn:nbn:hr:216:578953

Odobašić, Marijana. "Primjena 3D tiska u dizajnu ambalaže." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2010. https://urn.nsk.hr/urn:nbn:hr:216:578953

Odobašić, M. (2010). 'Primjena 3D tiska u dizajnu ambalaže', Master's thesis, University of Zagreb, Faculty of Graphic Arts, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:216:578953

Odobašić M. Primjena 3D tiska u dizajnu ambalaže [Master's thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2010 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:216:578953

M. Odobašić, "Primjena 3D tiska u dizajnu ambalaže", Master's thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2010. Available at: https://urn.nsk.hr/urn:nbn:hr:216:578953

Metadata
TitlePrimjena 3D tiska u dizajnu ambalaže
AuthorMarijana Odobašić
MentorBranka Lozo (mentor)
Committee memberDarko Babić (član povjerenstva)
Committee memberNina Knešaurek (član povjerenstva)
Committee memberBranka Lozo (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2010-10-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
Trodimenzionalni ink jet tisak jedna je od tehnologija brze izrade prototipova (RP eng. rapid prototyping). 3D ink jet tisak baziran je na konvencionalnom ink jet procesu tiska, uobičajenom u grafičkoj tehnologiji. Kao osnovni materijali koriste se prah (umjesto dvodimenzionalne podloge) i tekuće vezivo (kao boja). Objekti nastaju stvrdnjavanjem uzastopnih slojeva, presjeka objekta. Ovaj diplomski rad se sastoji od dva dijela koja su spojena u jednu kompaktnu cjelinu kako bi se dobilo gotovo dizajnersko rješenje koje može funkcionirati na tržištu – limited edition ambalaža (kutija) za čaj. U ovom diplomskom radu je detaljno prikazan i objašnjen cjelokupan proces izrade 3D ink-jet modela, od 3D modeliranja do gotovog 3D modela. Također je sažeto opisan generalni procesni tok brze izrade prototipova, kao i tehnološki okvir procesa. Uz to je objašnjen proces dizajna ambalaže, koji je i detaljno prikazan od procesa razrade ideje za dizajn do otiskivanja i dorade kako bismo dobili gotov proizvod.
Abstract (english)
Three-dimensional ink jet printing is one of the rapid prototyping (RP) techniques. 3D ink jet printing is based on conventional ink jet printing, used in graphic technology. Basic materials are powder (instead of a 2D substrate) and binder (instead of ink). The objects are built by hardening of the consecutive layers of powder and binder, which are cross-cuts of a 3D model. This master thesis consists of two parts which are connected in one compact unit to provide packaging design solution that can operate on the market- limited edition tea packaging (box). In this thesis is in detail presented and explained the entire process of creating 3D ink-jet models, ranging from 3D modelling to finished 3D models. Here is also briefly described the general process flow of rapid prototyping and technological framework of the process. Moreover, it is explained the packaging design process, which is shown in detail the entire process from developing ideas for the design, printing and finishing to get the finished product.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:578953
Study programmeTitle: Graphic technology; specializations in: Graphic technology, Design of graphic products
Course: Graphic technology
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-18 16:16:07