prikaz prve stranice dokumenta Analiza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke
No public access
master's thesis
Analiza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2012. urn:nbn:hr:216:713147
Rukavina, Vice
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Rukavina, V. (2012). Analiza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke (Master's thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:713147

Rukavina, Vice. "Analiza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2012. https://urn.nsk.hr/urn:nbn:hr:216:713147

Rukavina, Vice. "Analiza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2012. https://urn.nsk.hr/urn:nbn:hr:216:713147

Rukavina, V. (2012). 'Analiza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke', Master's thesis, University of Zagreb, Faculty of Graphic Arts, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:216:713147

Rukavina V. Analiza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke [Master's thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2012 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:216:713147

V. Rukavina, "Analiza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke", Master's thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2012. Available at: https://urn.nsk.hr/urn:nbn:hr:216:713147

Metadata
TitleAnaliza uzroka nastanka kvarova i vremena održavanja ofsetnog stroja za tisak na arke
AuthorVice Rukavina
MentorDubravko Banić (mentor)
Committee memberIgor Zjakić (član povjerenstva)
Committee memberDubravko Banić (član povjerenstva)
Committee memberStanislav Bolanča (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2012-3-1, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
U diplomskom radu opisane su metode preventivnog, održavanja po stanju i korektivnog održavanja ofsetnog tiskarskog stroja te radnje tekućeg održavanja stroja, preventivni i kontrolni pregledi, čišćenja i podmazivanja. Opisana je podjela kvarova ofsetnog stroja, njihova učestalost i pojavnost te kako pravovremeno pristupiti zamijeni strojnog elementa u ovisnosti o vrsti kvara. Opisane su metode dijagnostike kvarova i objašnjen je pojam redundantnosti. Opisani su mjerni instrumenti najčešće korišteni u dijagnostici kvarova tiskarskog stroja. Napravljena je analiza podataka o neočekivanim kvarovima kod ofsetnog tiskarskog stroja. Predstavljena je analiza podataka o kvarovima prema elementima stroja i navedeni su primjeri neočekivanih kvarova. Discipliniranim provođenjem održavanja upotpunjenim modernim tehnologijama za detekciju kvara, kao što je infracrvena termografska kamera postižu se visok učinak rada stroja uz optimalne troškove.
Abstract (english)
The thesis describes the methods of prevention, maintaining by condition and corrective maintenance of offset printing press, and the actions of the preventive care and checkups, cleaning and lubrication. Failures of printing press, their incidence and prevalence is shown in thesis. Optimal approach to the maintenance and correct time to replace the mechanical elements depending on the type of failure is shown. It describes the methods of failure diagnosis and explaines the concept of redundancy of printing press parts. Instruments most commonly used in the diagnosis of printing press failures are presented. Preliminary analysis of data collected on unexpected breakdowns in offset printing press is presented in this thesis. Disciplined implementation of the maintenance of the printing press complemented with modern technologies for fault detection, such as infrared thermography cameras achieved high performance of the printing press with optimal costs.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:713147
Study programmeTitle: Graphic technology; specializations in: Graphic technology, Design of graphic products
Course: Graphic technology
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-18 18:17:33