prikaz prve stranice dokumenta Postojanost ink jet otisaka nastalih termalnim transferom na tkanine
No public access
master's thesis
Postojanost ink jet otisaka nastalih termalnim transferom na tkanine
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2011. urn:nbn:hr:216:402202
Mišić, Maja
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Mišić, M. (2011). Postojanost ink jet otisaka nastalih termalnim transferom na tkanine (Master's thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:402202

Mišić, Maja. "Postojanost ink jet otisaka nastalih termalnim transferom na tkanine." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2011. https://urn.nsk.hr/urn:nbn:hr:216:402202

Mišić, Maja. "Postojanost ink jet otisaka nastalih termalnim transferom na tkanine." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2011. https://urn.nsk.hr/urn:nbn:hr:216:402202

Mišić, M. (2011). 'Postojanost ink jet otisaka nastalih termalnim transferom na tkanine', Master's thesis, University of Zagreb, Faculty of Graphic Arts, accessed 01 August 2024, https://urn.nsk.hr/urn:nbn:hr:216:402202

Mišić M. Postojanost ink jet otisaka nastalih termalnim transferom na tkanine [Master's thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2011 [cited 2024 August 01] Available at: https://urn.nsk.hr/urn:nbn:hr:216:402202

M. Mišić, "Postojanost ink jet otisaka nastalih termalnim transferom na tkanine", Master's thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2011. Available at: https://urn.nsk.hr/urn:nbn:hr:216:402202

Metadata
TitlePostojanost ink jet otisaka nastalih termalnim transferom na tkanine
AuthorMaja Mišić
MentorIgor Zjakić (mentor)
Committee memberStanislav Bolanča (član povjerenstva)
Committee memberNina Knešaurek (član povjerenstva)
Committee memberIgor Zjakić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2011-5-2, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
Primjena tehnike Ink Jet otiskivanja sve je češća pri otiskivanju na tkanine. Pritom je moguće primijeniti dva osnovna principa: direktno otiskivanje na tkanine i indirektno otiskivanje sa posredstvom transfera na tkanine. U ovom radu analiziran je indirektni termalni transfer koji se izvodi u 2 koraka: Ink Jet otiskivanjem na transfer medij te termalnim transferom na tkaninu. Pritom je korištena karakteristična transferna folija Iron On, koja je prilagođena za prihvat bojila na vodenoj bazi. Cilj ovog rada je određivanje razlike u obojenju između otisnute folije i transferirane folije na tkaninu kao i ponašanje tkanine nakon većeg broja pranja. Objektivna ocjena kvalitete reprodukcije postignuta je spektrofotometrijskom mjernom metodom (CIE LAB) na temelju koje je izračunata razlike u obojenju CIE ΔE2000. Rezultati prikazuju da će obje otisnute folije koje se transferiraju na pamučnu tkaninu svoje najveće promjene doživjeti nakon samog transfera. Nakon toga promjene koje se događaju ovise o temperaturi i broju pranja koji utječu na njih. Tako je uočeno da će otisci koji su prani na T=40°C svoje najveće promjena doživjeti nakon 3. pranja, dok će kod otisaka koju su prani na T=90°C najveća promjena nastati već nakon prvog pranja.
Abstract (english)
Ink jet printing tehnique is increasingly getting used when printing on fabrics. By doing that, two basic principles can be used: direct printing on fabrics or indirectly printing by means of fabric transfer. In this paper, we analyze indirect thermal transfer which is done in two steps: Ink Jet printing on transfer media and thermal transfer on fabric. Characteristic transfer foil - Iron On - is used in this process. This folie is adapted for dyestaff reception on water base. Purpose of this paper is determing a difference in dyeing between printed foil and transfered foil on fabrics, as is fabric reaction after multiple washes. Objective grade of reproductive quality is determined by spectrofotometric measuring method (CIE LAB). By using this method we can calculate difference in dyeing - CIE ΔE2000. Results are showing that both printed folies transfered on cotton fabric are bound to get their biggest changes immediately after the transfer itself. Changes that occur afterwards are dependable and affected by temperature and number of washes. It is measured that printings washed on temperature T=40°C receive its biggest changes after the third wash, and printings washed on temperature T=90°C immediately after the first wash.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:402202
Study programmeTitle: Graphic technology; specializations in: Graphic technology, Design of graphic products
Course: Graphic technology
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-18 20:08:57