prikaz prve stranice dokumenta Razvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing
No public access
master's thesis
Razvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2014. urn:nbn:hr:216:827540
Puceković, Nikolina
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Puceković, N. (2014). Razvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing (Master's thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:827540

Puceković, Nikolina. "Razvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2014. https://urn.nsk.hr/urn:nbn:hr:216:827540

Puceković, Nikolina. "Razvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2014. https://urn.nsk.hr/urn:nbn:hr:216:827540

Puceković, N. (2014). 'Razvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing', Master's thesis, University of Zagreb, Faculty of Graphic Arts, accessed 15 November 2024, https://urn.nsk.hr/urn:nbn:hr:216:827540

Puceković N. Razvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing [Master's thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2014 [cited 2024 November 15] Available at: https://urn.nsk.hr/urn:nbn:hr:216:827540

N. Puceković, "Razvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing", Master's thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:216:827540

Metadata
TitleRazvoj materijala na bio bazi u tiskarstvu = Development of bio-based materials in printing
AuthorNikolina Puceković
MentorBranka Lozo (mentor)
Committee memberSonja Jamnicki Hanzer (član povjerenstva)
Committee memberBranka Lozo (član povjerenstva)
Committee memberIvana Bolanča-Mirković (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2014-7-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
Grafička industrija se ponovno okreće prema korištenju materijala na bio bazi, kao što je to bilo od ranih dana tiskarstva pa sve do 20. stoljeća kada su proizvodi na bazi petroleja istisnuli iz uporabe materijale dobivene iz obnovljivih izvora. Upotreba održivih rješenja u tisku je promovirana pod inicijativom ekološkog ili green tiska i konstantnog poboljšanja kvalitete ili lean tiska. Boje na bazi biljnih ulja, laboratorijski dobiven premaz od nanoceluloznih kristala (CNC) i papir dobiven od otpadaka u preradi šećerne trske su odabrani tiskovni materijali dobiveni iz obnovljivih sirovina koje obiluju resursima. Ispitivanje tiskarskih svojstva navedenih materijala je provedeno na laboratorijskoj razini u obliku preliminarnih testova za primjenu u ofsetu. Cilj rada je istražiti mogu li materijali na bio bazi konkurirati u tiskarskim svojstvima konvencionalno korištenim materijalima, često dobivenim iz neodrživih izvora. Testovi su rađeni po slijedećim IGT metodama: viskozitet boje, ljepljivost boje, prijenos boje, set-off, tisak mokro na mokro, čupanje i penetracija boje. Reprodukcija boja na bazi biljnih ulja ne ukazuje na veće zaostatke za konvencionalno korištenim bojama na bazi mineralnih ulja koji bi uzrokovali prepreku s tehničke strane kod korištenja u ofsetnom tisku. CNC premaz na papiru povećava sjaj otisaka, ali i produžuje vrijeme sušenja boje. Papir dobiven od otpadaka šećerne trske pokazuje veću čvrstoću površine naspram papira dobivenog od drvnih vlakanaca.
Abstract (english)
The graphic industry is again turning towards the use of bio-based materials, as it was since the early days of printing till the 20th century when petroleum-based products pushed away materials derived from renewable resources. Today sustainable development in the graphic industry is promoted by the green and lean printing initiative. Vegetable oil-based inks, laboratory prepared cellulose nanocrystals (CNC) coating and sugarcane bagasse paper present selected print materials that are derived from renewable raw materials with abundant resources. Materials are examined at laboratory scale in the form of preliminary, printability tests for offset application with a main objective to investigate the printability competitiveness of bio-based materials with conventionally used materials, which are often derived from unsustainable resources. Research was carried out using following IGT test methods: viscosity, tack, ink transfer, set-off, wet-on-wet printing, picking and ink penetration. The ink performance and print reproduction of vegetable oil-based ink did not show substantial difference in comparison to the conventionally used mineral oil-based ink that would cause technical drawback in the use of vegetable oil-based ink in offset. CNC coating on paper increased the surface and print gloss, but as a downside, it prolonged the drying time of ink. Sugarcane bagasse paper showed greater surface strength in contrast to the paper produced from wood fibres.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:827540
Study programmeTitle: Graphic technology; specializations in: Graphic technology, Design of graphic products
Course: Graphic technology
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-18 20:10:15