prikaz prve stranice dokumenta Istraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije
No public access
master's thesis
Istraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2016. urn:nbn:hr:216:989024
Goričanec, Matea
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Goričanec, M. (2016). Istraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije (Master's thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:989024

Goričanec, Matea. "Istraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2016. https://urn.nsk.hr/urn:nbn:hr:216:989024

Goričanec, Matea. "Istraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2016. https://urn.nsk.hr/urn:nbn:hr:216:989024

Goričanec, M. (2016). 'Istraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije', Master's thesis, University of Zagreb, Faculty of Graphic Arts, accessed 19 November 2024, https://urn.nsk.hr/urn:nbn:hr:216:989024

Goričanec M. Istraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije [Master's thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2016 [cited 2024 November 19] Available at: https://urn.nsk.hr/urn:nbn:hr:216:989024

M. Goričanec, "Istraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije", Master's thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:216:989024

Metadata
TitleIstraživanje mogućnosti izrade modela medicinskog pomagala za prijelome pomoću 3d tehnologije
AuthorMatea Goričanec
MentorDamir Modrić (mentor)
Committee memberNikola Mrvac (član povjerenstva)
Committee memberDamir Modrić (član povjerenstva)
Committee memberMiroslav Mikota (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2016-7-4, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
Brza izrada prototipa je tehnologija koja podrazumijeva izradu trodimenzionalnih modela procesom aditivne tehnologije 3d ispisa. Usko povezane tehnologije su 3d skeniranje i 3d modeliranje, kojima započinje generiranje virtualnog 3d modela. Sve vrste aditivnog 3d ispisa temelje se na izradi modela slo po sloj generiranog pomoću virtualnog 3d modela. Takvi modeli nalaze široku primjenu u svim područjima ljudskog života, a najrevolucionarniju u medicini. Ovaj rad razmatra mogućnost izrade primjenjivog modela medicinskog pomagala za prijelome (gipsa), pomoću tehnologije 3d skeniranja, modeliranja te 3d ispisa (modeliranje topljenim depozitom). Naglasak je na izradi prototipa pomoću kojega će se ispitati funkcionalnost, ekonomičnost, brzina i estetska vrijednost, s obzirom na postupak izrade.
Abstract (english)
Rapid prototyping is a technology that involves the construction of three-dimensional model with process of 3d printing. Closely related technologies are 3d scanning and modeling by which begins generating of a virtual 3d model. All kinds of additive technologies are based on modeling layer by layer, generated using CAD files rather .stl format. Such models are widely used in all areas of human life, and the most revolutionary in medicine. This thesis discusses the possibility of making the applicable model of medical cast for fractures (plaster), using 3d scanning technology, modeling and 3d printing (fused deposition modeling). The emphasis is on the development of a prototype that will be tested on functionality, cost-effectiveness, speed and aesthetics with regard to the type of threedimensional printing (rapid prototyping) and the material used in the process.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:989024
Study programmeTitle: Graphic technology; specializations in: Graphic technology, Design of graphic products
Course: Graphic technology
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-18 21:05:04