prikaz prve stranice dokumenta Manipulacija bojama u Ink Jet tisku
  Download
PDF 5.9 MB
master's thesis
Manipulacija bojama u Ink Jet tisku
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2016. urn:nbn:hr:216:906930
Damjanović, Marina
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Damjanović, M. (2016). Manipulacija bojama u Ink Jet tisku (Master's thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:906930

Damjanović, Marina. "Manipulacija bojama u Ink Jet tisku." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2016. https://urn.nsk.hr/urn:nbn:hr:216:906930

Damjanović, Marina. "Manipulacija bojama u Ink Jet tisku." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2016. https://urn.nsk.hr/urn:nbn:hr:216:906930

Damjanović, M. (2016). 'Manipulacija bojama u Ink Jet tisku', Master's thesis, University of Zagreb, Faculty of Graphic Arts, accessed 15 November 2024, https://urn.nsk.hr/urn:nbn:hr:216:906930

Damjanović M. Manipulacija bojama u Ink Jet tisku [Master's thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2016 [cited 2024 November 15] Available at: https://urn.nsk.hr/urn:nbn:hr:216:906930

M. Damjanović, "Manipulacija bojama u Ink Jet tisku", Master's thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:216:906930

Metadata
TitleManipulacija bojama u Ink Jet tisku
AuthorMarina Damjanović
MentorIgor Zjakić (mentor)
Committee memberMaja Strgar Kurečić (član povjerenstva)
Committee memberIgor Zjakić (član povjerenstva)
Committee memberDamir Modrić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2016-9-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
Kod svake tehnike tiska prije procesa otiskivanja potrebno je kvalitetno obraditi sliku kako bi krajnja reprodukcija bila što kvalitetnija. U ovom diplomskom radu istražit će se koje je parametre potrebno koristiti pri manipulacije bojom za Inkjet tisak. Istraživanje se provodi kroz nekoliko faza kako bi dobili određene zaključke. Prva faza je priprema samih predložaka na kojima će se nakon otiskivanja vršiti prvo vizualni odabir pomoću ankete i mišljenja ispitanika, nakon čega slijedi druga faza istraživanja. Druga faza istraživanja odnosi se na kolorimetrijska mjerenja uzoraka kako bi se ustanovile precizne vrijednosti boja koje se u konačnici prikazuju pomoću trodimenzionalnih grafova i tako određuju postoji li promjena u tonu boje, zasićenosti ili svjetline. Kako bi se izračunala stvarna udaljenost između točaka koristi se izraz ΔE* = [ (ΔL*)2 + (Δa*)2 + (Δb*)2 ]1/2 čije se vrijednosti uspoređuju s zadanim vrijednostima kako bi se uočio stupanj razlike.
Abstract (english)
At each printing techniques before printing process, a high quality image process to end the reproduction of the highest quality. This thesis will be examined by the parameters should be used in the manipulation of color inkjet printing. The rese-arch was carried out through several stages to get some conclusions. The first stage is to prepare templates to be used after printing carried out the first visual selection using surveys and opinions of buyers, followed by a second phase of research. The second phase of research relates to the colorimetric measurement samples to establish the precise color values that are ultimately displayed using the three-dimensional graphs and also determine if there is a change in the color, saturation and brightness. In order to calculate the actual distance between po-ints used the term ΔE* = [ (ΔL*)2 + (Δa*)2 + (Δb*)2 ]1/2 whose values are compared with set values to observed the degree of difference.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:906930
Study programmeTitle: Graphic technology; specializations in: Graphic technology, Design of graphic products
Course: Graphic technology
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-04-18 21:30:29