prikaz prve stranice dokumenta Optimiranje sustava u nakladničkom uvezu knjiga : studija slučaja
No public access
master's thesis
Optimiranje sustava u nakladničkom uvezu knjiga : studija slučaja
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2018. urn:nbn:hr:216:539871
Stančin, Dijana
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Stančin, D. (2018). Optimiranje sustava u nakladničkom uvezu knjiga : studija slučaja (Master's thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:539871

Stančin, Dijana. "Optimiranje sustava u nakladničkom uvezu knjiga : studija slučaja." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2018. https://urn.nsk.hr/urn:nbn:hr:216:539871

Stančin, Dijana. "Optimiranje sustava u nakladničkom uvezu knjiga : studija slučaja." Master's thesis, University of Zagreb, Faculty of Graphic Arts, 2018. https://urn.nsk.hr/urn:nbn:hr:216:539871

Stančin, D. (2018). 'Optimiranje sustava u nakladničkom uvezu knjiga : studija slučaja', Master's thesis, University of Zagreb, Faculty of Graphic Arts, accessed 07 September 2024, https://urn.nsk.hr/urn:nbn:hr:216:539871

Stančin D. Optimiranje sustava u nakladničkom uvezu knjiga : studija slučaja [Master's thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2018 [cited 2024 September 07] Available at: https://urn.nsk.hr/urn:nbn:hr:216:539871

D. Stančin, "Optimiranje sustava u nakladničkom uvezu knjiga : studija slučaja", Master's thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:216:539871

Metadata
TitleOptimiranje sustava u nakladničkom uvezu knjiga : studija slučaja
AuthorDijana Stančin
MentorSuzana Pasanec Preprotić (mentor)
Committee memberDavor Donevski (član povjerenstva)
Committee memberSuzana Pasanec Preprotić (član povjerenstva)
Committee memberDubravko Banić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2018-9-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
Glavna ideja bila je napraviti analizu knjigoveških proizvoda prema tehničkotehnološkim parametrima. Takvi su proizvodi bili sistematizirani unutar četiriju sistematizacijskih cjelina: prema načinu uveza, parametrima strojnog načina proizvodnje, parametrima linijskog načina proizvodnje te prema usporedbi ta dva načina proizvodnje. Time se dobio uvid u sastavne elemente proizvoda, a ovaj dio istraživanja omogućio je bolje razumijevanje i analizu pojedinih tehnologija uvezivanja knjiga. Usporedba je pokazala određene sličnosti i razlike između dva načina proizvodnje, što je omogućilo daljnje istraživanje. Implementiranjem rezultata usporedbe u postavljene hipoteze istraživanja pokazala se učestalost ponavljanja pojedinih karakteristika i tehnologija, te su se hipoteze potvrdile ili odbacile. Prema rezultatima, odabrane su tehnologije kojima bi se na tržištu RH moglo isplativo poslovati. Proizvodi koji ulaze u navedene tehnologije prikupljeni su i predloženi unutar jednogodišnjeg plana takvog sustava. Navedeni rezultati mogu služiti kao smjernice za razvoj knjigoveške infrastrukture, a sam rad i za bolje razumijevanje složenih tehnologija uvezivanja.
Abstract (english)
The main idea was to make an analysis of bookbinding products according to their technical-technological parameters. Such products were systematized within four systematization units: by way of binding, parameters of serial production, parameters of line production and comparison of these two modes of production. This gave insight into the component elements of products and this part of the research provided a better understanding and analysis of some book binding technologies. The comparison showed some similarities and differences between the two modes of production, which enabled further research. By implementing the comparison results in the hypothesis of the research, the frequency of repetition of certain parameters and technologies has been shown, and hypotheses have been confirmed or rejected. According to the results, technologies were selected to be profitable in the Republic of Croatia’s market. Products that incorporate these technologies have been collected and proposed within a one-year plan of such a system. The aforementioned results can serve as guidelines for the development of book binding infrastructure, and the paper itself for a better understanding of complex binding technologies.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:539871
Study programmeTitle: Graphic technology; specializations in: Graphic technology, Design of graphic products
Course: Graphic technology
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-18 22:24:24