Corrugated board is a graphical product whose quality largely depends on the parameters and their effects during production. The parameters of the raw material significantly affect the quality of corrugated cardboard. During production should be seen these parameters that you deliver perfect product. The raw material - paper and glue must comply with the parameters which are moisture, temperature, type and weight of paper. Due to the poor quality parameters and raw materials, final graphic product corrugated cardboard is folded, this is not such a good quality for use in further its application (transport, protection, etc.). Folding corrugated cardboard, ie warping a major problem in the packaging industry and a large part of production is a bad product. To the industry warping is big problem, and they are trying with experience and production reduce problem, but due to the volume of work does not come to devote attention to research. This study would greatly assist in the packaging printing industry. Conducted several interviews with employees of the packaging industry and their commentaries that they koritavost is causing trouble such as recall or too large a percentage goes to waste. The monitoring and measurement of parameters of raw material will try to influence the quality of the final product corrugated cardboard. The aim of this study is to monitor the parameters and try to reduce or completely remove warping of corrugated cardboard.