prikaz prve stranice dokumenta Automatika integriranim Brinner sustavom
No public access
undergraduate thesis
Automatika integriranim Brinner sustavom
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2012. urn:nbn:hr:216:147159
Tomić, Petar
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Tomić, P. (2012). Automatika integriranim Brinner sustavom (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:147159

Tomić, Petar. "Automatika integriranim Brinner sustavom." Undergraduate thesis, University of Zagreb, Faculty of Graphic Arts, 2012. https://urn.nsk.hr/urn:nbn:hr:216:147159

Tomić, Petar. "Automatika integriranim Brinner sustavom." Undergraduate thesis, University of Zagreb, Faculty of Graphic Arts, 2012. https://urn.nsk.hr/urn:nbn:hr:216:147159

Tomić, P. (2012). 'Automatika integriranim Brinner sustavom', Undergraduate thesis, University of Zagreb, Faculty of Graphic Arts, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:216:147159

Tomić P. Automatika integriranim Brinner sustavom [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2012 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:216:147159

P. Tomić, "Automatika integriranim Brinner sustavom", Undergraduate thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2012. Available at: https://urn.nsk.hr/urn:nbn:hr:216:147159

Metadata
TitleAutomatika integriranim Brinner sustavom
AuthorPetar Tomić
MentorDubravko Banić (mentor)
Committee memberSanja Mahović Poljaček (član povjerenstva)
Committee memberDubravko Banić (član povjerenstva)
Committee memberNikola Mrvac (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2012-3-1, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
U ofset tisku nije lako postići jedan standard a još ga se teže pridržavati kroz više naklada, jer na rezultat tiskanja u pogledu boja utječu mnoge ulazne vrijednosti. Cilj ovog rada je predstaviti automatizirani integrirani PRINT CONSULTTM program sustava Brinner®, koji pomaže u održavanju sve većih zahtjeva tržišta za kvalitetom. Instalacija takvog sustava daje mogućnost bolje kontrole otisaka. Program PRINT CONSULTTM vrednuje mjerni rezultat tiska u odnosu na Eurostandard/Globalstandard. Mjerenja se provode na specijalnoj CCI PRINT CONSULTTM kontrolnoj traci. Visok broj mjernih polja po zonskom vijku stvara pretpostavku za opširnu dijagnozu višebojnog procesa tiskanja. U praktičnom dijelu rada prikazani su i prodiskutirani rezultati online automatske korekcije s integriranim Brinner® PRINT CONSULTTM programom. Informacije dobivene tim mjerenjima koriste se za optimizaciju standarda tiskanja.
Abstract (english)
In offset printing it’s not easy to achieve a standard and yet it is difficult to observe through several editions, because the result of printing in terms of color is influenced by many inputs. The aim of this paper is to introduce an automated integrated PRINT CONSULTTM program Brinner® system, which helps to keep the growing market demand for quality. Installing such a system provides the ability to better control prints. Program PRINT CONSULTTM evaluated measurement result of the press in relation to Eurostandard/Globalstandard. The measurements are performed at a special CCI PRINT CONSULTTM control bar. The high number of measuring fields per zone slide rule creates the precondition for comprehensive diagnosis of polychrome printing process. In the practical part of the paper online results with integrated automatic correction Brinner® PRINT CONSULTTM program are presented and discussed. Information obtained through these measurements are used to optimize the standard of the printing.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:147159
Study programmeTitle: Printing technology, course Technical - technological
Course: Graphic technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka grafičke tehnologije (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-16 18:37:16