prikaz prve stranice dokumenta Automatizacija CtP sustava termalnom tehnologijom
No public access
undergraduate thesis
Automatizacija CtP sustava termalnom tehnologijom
Zagreb: University of Zagreb, Faculty of Graphic Arts, 2013. urn:nbn:hr:216:194017
Kužet, Vicko
University of Zagreb
Faculty of Graphic Arts

Institutional repository: Faculty of Graphic Arts Repository

Cite this document

Kužet, V. (2013). Automatizacija CtP sustava termalnom tehnologijom (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Graphic Arts. Retrieved from https://urn.nsk.hr/urn:nbn:hr:216:194017

Kužet, Vicko. "Automatizacija CtP sustava termalnom tehnologijom." Undergraduate thesis, University of Zagreb, Faculty of Graphic Arts, 2013. https://urn.nsk.hr/urn:nbn:hr:216:194017

Kužet, Vicko. "Automatizacija CtP sustava termalnom tehnologijom." Undergraduate thesis, University of Zagreb, Faculty of Graphic Arts, 2013. https://urn.nsk.hr/urn:nbn:hr:216:194017

Kužet, V. (2013). 'Automatizacija CtP sustava termalnom tehnologijom', Undergraduate thesis, University of Zagreb, Faculty of Graphic Arts, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:216:194017

Kužet V. Automatizacija CtP sustava termalnom tehnologijom [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Graphic Arts; 2013 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:216:194017

V. Kužet, "Automatizacija CtP sustava termalnom tehnologijom", Undergraduate thesis, University of Zagreb, Faculty of Graphic Arts, Zagreb, 2013. Available at: https://urn.nsk.hr/urn:nbn:hr:216:194017

Metadata
TitleAutomatizacija CtP sustava termalnom tehnologijom
AuthorVicko Kužet
MentorDubravko Banić (mentor)
Committee memberSanja Mahović Poljaček (član povjerenstva)
Committee memberDubravko Banić (član povjerenstva)
Committee memberMirela Rožić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Graphic Arts
Zagreb
Defense date and country2013-3-8, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Graphic Technology
Abstract
U ovom završnom radu obrađena je tema novih trendova za postizanje što kvalitetnijeg otiska u što kraćem vremenu, a vezano za termalne pločeComputer to plate sustava i termalnom tehnologijom. Uvođenjem novih tehnologija u tiskarsku industriju dobivaju se brži, jeftiniji, isplativiji, precizniji i kvalitetniji proizvodi, koji se mogu i naknadno ponavljati uz zadržavanje iste razine kvalitete uz minimalne napore. Automatiziranje Computer to plate tehnologijom koja se bazira na termalnoj tehnologiji uvelike pospješuje kvalitetu i uštedu u tiskarskoj tehnologiji. Usporedbom tri vrste termalni tiskovnih formi primjećuje se i njihov utjecaj na stupanj automatizacije, brzinu izrade tiskovne forme, uštedu i mogućnost što kvalitetnijeg i bržeg otiska. Razlika u kvaliteti laserske glave Computer to plate uređaja očituje se i u kvaliteti otiska, kao i vrsta rasterske točke koja utječe na prirast u tisku, te postizanjukvalitetnijih otisaka. Pojavljuje se i rastezanje tiskovne forme, koja utječe na kvalitetu otiska te postizanje preciznog pasanja boja na offset stroju tijekom tiska.
Abstract (english)
This final paper elabrorate the new trends and achierement of the best quality prints in less time, conecering the thermal panels for Computer to Plate and thermal technology. The introduction of new technologies in the printing industry are obtained faster, cheaper, cost-effective, accurate and higher quality products, which can be subsequently repeated while keeping the same level of quality with minimal effort. Automatination of Computer to plate technology, which is based on thermal technology, greatly enhances the quality and savings in printing technology. Comparing the three types of thermal printing forms is can be noticed and their impact on the level of automatination, printing speed, saving financial and the possibilities of better and faster prints. The difference in the quality of the laser head Computer to plate machine is reflected in the quality of the print, and the type of raster point that affects the growth of the press and achierment of the more qualiten prints of the prints. The a stretch of plates affects the quality of the prints and achieve precise amaunt of the color in offset machine during printing.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:216:194017
Study programmeTitle: Printing technology, course Technical - technological
Course: Graphic technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka grafičke tehnologije (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka grafičke tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-16 18:56:17