prikaz prve stranice dokumenta Ispitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini
  Download
PDF 1.69 MB
master's thesis
Ispitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini
diplomski rad
Split: University of Split, Faculty of Chemistry and Technology, 2019. urn:nbn:hr:167:152782
Terzić, Lana
University of Split
Faculty of Chemistry and Technology
Division of Engineering and Chemistry

Institutional repository: Repository of the Faculty of chemistry and technology

Cite this document

Terzić, L. (2019). Ispitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini : diplomski rad (Master's thesis). Split: University of Split, Faculty of Chemistry and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:167:152782

Terzić, Lana. "Ispitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini : diplomski rad." Master's thesis, University of Split, Faculty of Chemistry and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:167:152782

Terzić, Lana. "Ispitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini : diplomski rad." Master's thesis, University of Split, Faculty of Chemistry and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:167:152782

Terzić, L. (2019). 'Ispitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini : diplomski rad', Master's thesis, University of Split, Faculty of Chemistry and Technology, accessed 26 November 2024, https://urn.nsk.hr/urn:nbn:hr:167:152782

Terzić L. Ispitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini : diplomski rad [Master's thesis]. Split: University of Split, Faculty of Chemistry and Technology; 2019 [cited 2024 November 26] Available at: https://urn.nsk.hr/urn:nbn:hr:167:152782

L. Terzić, "Ispitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini : diplomski rad", Master's thesis, University of Split, Faculty of Chemistry and Technology, Split, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:167:152782

Metadata
TitleIspitivanje korozije legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini : diplomski rad
Title (english)Corrossion investigation of CuAlNi alloy in 0,5 mol dm-3 H2SO4 solution : diploma thesis
AuthorLana Terzić
MentorLadislav Vrsalović (mentor)
MBZ: 237626
Committee memberSenka Gudić (predsjednik povjerenstva)
GranterUniversity of Split
Faculty of Chemistry and Technology
(Division of Engineering and Chemistry)
Split
Defense date and country2019-09-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
Korozijsko ponašanje legure CuAlNi u 0,5 mol dm-3 H2SO4 otopini otopini ispitano je elektrokemijskim metodama kao što su mjerenje potencijala otvorenog strujnog kruga, linearna i potenciodinamička polarizacija i ciklička voltametrija. Ispitivanja su provedena u deaeriranoj 0,5 mol dm-3 H2SO4 pri temperaturama elektrolita od 20 i 40 stupnjeva C. Nakon polarizacijskih ispitivanja površine elektroda ispitane su svjetlosnim i elektronskim mikroskopom dok je elementarni sastav u pojedinim točkama površine odreĎen EDS analizom. Ispitivanjem se utvrdilo da u H2SO4 otopini dolazi do interkristalne korozije CuAlNi legure čiji intenzitet raste s povećanjem temperature elektrolita.
Abstract (english)
The corrosion behavior of CuAlNi alloy in 0,5 mol dm-3 H2SO4 solution was examined by electrochemical methods such as open circuit potential measurement, linear and potentiodynamic polarization, and cyclic voltammetry. Investigations were performed in deaerated 0,5 mol dm-3 H2SO4 at electrolyte temperatures 20 and 40 degrees C. After polarization testing, the electrode surfaces were examined by light and electron microscope, while the elemental composition at individual points of the alloy surface was determined by EDS analysis. Investigations have shown that in H2SO4 solution an intercrystalline corrosion of CuAlNi alloy occurred whose intensity increases with increasing electrolyte temperature.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:167:152782
Study programmeTitle: Chemical Technology; specializations in: Materials, Environmental Protection, Mediteranean Cultures
Course: Materials
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka kemijskog inženjerstva (magistar/magistra inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public noteKljučne riječi doradio knjižničar/ Key words are revised by the librarian
Created on2019-11-14 10:36:55