prikaz prve stranice dokumenta Višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi
  Download
PDF 1.26 MB
undergraduate thesis
Višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi
završni rad
Split: University of Split, Faculty of Chemistry and Technology, 2019. urn:nbn:hr:167:546805
Galić, Josip
University of Split
Faculty of Chemistry and Technology
Division of Engineering and Chemistry

Institutional repository: Repository of the Faculty of chemistry and technology

Cite this document

Galić, J. (2019). Višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi : završni rad (Undergraduate thesis). Split: University of Split, Faculty of Chemistry and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:167:546805

Galić, Josip. "Višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:167:546805

Galić, Josip. "Višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:167:546805

Galić, J. (2019). 'Višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi : završni rad', Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, accessed 01 December 2024, https://urn.nsk.hr/urn:nbn:hr:167:546805

Galić J. Višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi : završni rad [Undergraduate thesis]. Split: University of Split, Faculty of Chemistry and Technology; 2019 [cited 2024 December 01] Available at: https://urn.nsk.hr/urn:nbn:hr:167:546805

J. Galić, "Višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi : završni rad", Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, Split, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:167:546805

Metadata
TitleVišecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi : završni rad
Title (english)Fixed tube bundle heat exchanger, type 1-2 : bachelor thesis
AuthorJosip Galić
MentorMiroslav Labor (mentor)
MBZ: 199731
Committee memberVanja Martinac (predsjednik povjerenstva)
Committee memberNenad Kuzmanić (član povjerenstva)
Committee memberMiroslav Labor (član povjerenstva)
GranterUniversity of Split
Faculty of Chemistry and Technology
(Division of Engineering and Chemistry)
Split
Defense date and country2019-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
Cilj ovog završnog rada je ispitati da li se višecijevni izmjenjivač topline (tip 1-2) s učvršćenim snopom cijevi može primijeniti u cementnoj industriji za hlađenje mineralnog ulja kojim se podmazuju klizni ležajevi rotacijske peći u tehnološkom procesu proizvodnje cementa. Mineralno ulje potrebno je ohladiti od 35 °C na 31 °C. Ulje struji oko cijevi u plaštu volumnim protokom 10 L/min. Kroz cijevni snop od 44 bakrene cijevi vanjskog promjera 10 x 1 mm i duljine 840 mm struji rashladna voda ulazne temperature 28 °C uz različite volumne protoke od 1; 1,5 i 2 m 3 /h. Raspored cijevi je u trokutu s korakom od 13 mm, a broj pregrada u plaštu je 9. Rezultati proračuna pokazuju da je potrebna površina za izmjenjivač topline manja u odnosu na raspoloživu iz čega se zaključuje da je moguće primijeniti navedeni tip izmjenjivača. Sva tri ispitivana volumna protoka rashladne vode u cijevnom snopu uzrokuju prijelazno područje strujanja (2300 < Re < 10 000), dok je strujanje ulja u plaštu laminarno (Re < 2300).
Abstract (english)
Main purpose of this bachelor thesis is to determine is it possible to utilize fixed tube bundle heat exchanger (type 1-2) for cooling mineral oil which lubricates sliding bearings of rotary kiln in technological process of cement production. Mineral oil should be cooled from 35 o C to 31 o C. The oil flows around the pipe in the sheath at a volume flow of 10 L / min. Cooling water of inlet temperature of 28 °C flows through a bundle of 44 copper tubes with an external diameter of 10 x 1 mm and a length of 840 mm with different volume flows of 1; 1,5 and 2 m 3 /h. The arrangement of the pipes is in a triangle with a step of 13 mm, and the number of baffles inside the sheat is 9. The results of the examination show that the required surface area for the heat exchanger is smaller than that available, from which it is concluded that it is possible to apply the said type of exchanger. All three test volumes of cooling water flow in the tube bundle cause a transient flow area (2300 <Re <10 000), while the oil flow in the sheath is laminar (Re <2300).
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:167:546805
Study programmeTitle: Chemical Technology; specializations in: Chemical Engineering, Environmental Protection
Course: Chemical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka kemijskog inženjerstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-12-09 09:49:27