prikaz prve stranice dokumenta Priprema i karakterizacija kompozita polilaktid/klinoptilolit
  Download
PDF 2.08 MB
undergraduate thesis
Priprema i karakterizacija kompozita polilaktid/klinoptilolit
završni rad
Split: University of Split, Faculty of Chemistry and Technology, 2020. urn:nbn:hr:167:946371
Pastuović, Anna
University of Split
Faculty of Chemistry and Technology
Division of Engineering and Chemistry

Institutional repository: Repository of the Faculty of chemistry and technology

Cite this document

Pastuović, A. (2020). Priprema i karakterizacija kompozita polilaktid/klinoptilolit : završni rad (Undergraduate thesis). Split: University of Split, Faculty of Chemistry and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:167:946371

Pastuović, Anna. "Priprema i karakterizacija kompozita polilaktid/klinoptilolit : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2020. https://urn.nsk.hr/urn:nbn:hr:167:946371

Pastuović, Anna. "Priprema i karakterizacija kompozita polilaktid/klinoptilolit : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2020. https://urn.nsk.hr/urn:nbn:hr:167:946371

Pastuović, A. (2020). 'Priprema i karakterizacija kompozita polilaktid/klinoptilolit : završni rad', Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:167:946371

Pastuović A. Priprema i karakterizacija kompozita polilaktid/klinoptilolit : završni rad [Undergraduate thesis]. Split: University of Split, Faculty of Chemistry and Technology; 2020 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:167:946371

A. Pastuović, "Priprema i karakterizacija kompozita polilaktid/klinoptilolit : završni rad", Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, Split, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:167:946371

Metadata
TitlePriprema i karakterizacija kompozita polilaktid/klinoptilolit : završni rad
Title (english)Preparation and characterization of polylactide/clinoptilolite composites : bachelor thesis
AuthorAnna Pastuović
MentorBranka Andričić (mentor)
Committee memberNataša Stipanelov-Vrandečić (predsjednik povjerenstva)
Committee memberVesna Sokol (član povjerenstva)
Committee memberBranka Andričić (član povjerenstva)
GranterUniversity of Split
Faculty of Chemistry and Technology
(Division of Engineering and Chemistry)
Split
Defense date and country2020-09-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
Svrha ovog rada je pripremiti kompozite polilaktid/klinoptililot metodom izlijevanja filma i istražiti utjecaj klinoptilolita na svojstva polilaktida (ponašanje u vodi i toplinska razgadnja). Pripremljeni su filmovi kompozita PLA/klinoptilolit u kloroformu s 0, 2, 4, 6, 8 i 10 % klinoptilolita. Analizom FT-IR spektara potvrđen je zaostatak otapala u kompozitima. Primjenom neizotermne termogravimetrije istraživan je utjecaj klinoptilolita na toplinsku postojanost PLA. Rezultati su pokazali da dodatak klinoptilolita poboljšava toplinsku postojanost polilaktida. Kompoziti PLA/klinoptilolit su držani u vodi 5 dana kako bi se utvrdilo dolazi li do procesa apsorpcije vode ili hidrolize polilaktida. Pretpostavlja se da je kod svih kompozita došlo do hidrolize polilaktida, a kod kompozita sa 6 i 8 % klinoptilolita došlo je i do apsorpcije vode.
Abstract (english)
The purpose of this thesis is to prepare polylactide/clinoptilolite composites by the film casting method and to investigate the influence of clinoptilolite on the properties of polylactide (water behavior and thermal decomposition). Films of PLA/clinoptilolite composites in chloroform with 0, 2, 4, 6, 8 and 10 % clinoptilolite were prepared. Solvent residue in the composites was confirmed by FT-IR spectrum analysis. The influence of clinoptilolite on thermal stability of PLA was investigated using non-isothermal thermogravimetry. The results showed that the addition of clinoptilolite improves the thermal stability of polylactide. PLA/clinoptilolite composites were kept in water for 5 days to determine whether a process of water absorption or hydrolysis of the polylactide occurred. It is assumed that polylactide hydrolysis occurred in all composites, and water absorption occurred in composites with 6 and 8 % clinoptilolite.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:167:946371
Study programmeTitle: Protection and Recycling of Materials
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni prvostupnik (Baccalaureus) inženjer kemijskog inženjerstva (stručni prvostupnik (Baccalaureus) inženjer kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-10-13 09:26:22