prikaz prve stranice dokumenta SAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA
Access restricted to students and staff of home institution
undergraduate thesis
SAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA
Split: University of Split, 2021. urn:nbn:hr:228:750857
Doždor, Matej
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Doždor, M. (2021). SAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:750857

Doždor, Matej. "SAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA." Undergraduate thesis, University of Split, 2021. https://urn.nsk.hr/urn:nbn:hr:228:750857

Doždor, Matej. "SAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA." Undergraduate thesis, University of Split, 2021. https://urn.nsk.hr/urn:nbn:hr:228:750857

Doždor, M. (2021). 'SAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA', Undergraduate thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:750857

Doždor M. SAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA [Undergraduate thesis]. Split: University of Split; 2021 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:750857

M. Doždor, "SAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA", Undergraduate thesis, University of Split, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:228:750857

Metadata
TitleSAVIJANJE DEBELIH ZAKRIVLJENIH ŠTAPOVA
Title (english)BENDING THICK CURVED BEAMS
AuthorMatej Doždor
MentorAdo Matoković (mentor)
Committee memberIgor Gabrić (član povjerenstva)
Committee memberIvan Vrljičak (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2021-07-08, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U navedenom završnom radu prikazat ću proces izrade robotskog automobila upravljanog mobitelom putem Bluetooth modula, L298N drajver motora, Arduino Mega 2560 razvojne pločice i Ultrazvučnog senzora. Cilj ovog projekta je prikazati mogućnost upravljanja robotskim automobilom pomoću bluetooth veze na način da robotski automobil može detektirati prepreke ispred njega i zaustaviti se ako je preblizu prepreke. Odlučio sam se za ovaj projekt zato što smatram da je ovo jako dobar primjer primijenjene elektronike.
Abstract (english)
In the stated final assignment I am going to show the process of making a Robotic Car, controlled by smartphone via Bluetooth module, L298N motor driver, Arduino Mega 2560 development board and Ultrasonic sensor. The goal of this project is to show the ability of controling a Robotic Car via bluetooth connection, that is also going to have ability of detecting an obstacle in front of it and stoping if it is too close to it. I decided to make this project because I think that it is a very good example of Applied Electronics.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:750857
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-07-09 06:31:30