prikaz prve stranice dokumenta UVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA
  Download
PDF 9.58 MB
master's thesis
UVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA
Split: University of Split, 2021. urn:nbn:hr:228:120665
Turčinov, Augustin
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Turčinov, A. (2021). UVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA (Master's thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:120665

Turčinov, Augustin. "UVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA." Master's thesis, University of Split, 2021. https://urn.nsk.hr/urn:nbn:hr:228:120665

Turčinov, Augustin. "UVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA." Master's thesis, University of Split, 2021. https://urn.nsk.hr/urn:nbn:hr:228:120665

Turčinov, A. (2021). 'UVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA', Master's thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:120665

Turčinov A. UVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA [Master's thesis]. Split: University of Split; 2021 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:120665

A. Turčinov, "UVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA", Master's thesis, University of Split, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:228:120665

Metadata
TitleUVIJANJE TANKOSTJENIH ŠTAPOVA OTVORENOG PRESJEKA
Title (english)TWISTING OF THIN-WALLED RODS WITH OPEN CROSS-SECTION
AuthorAugustin Turčinov
MentorAdo Matoković (mentor)
Committee memberDanijela Pezer (član povjerenstva)
Committee memberVladimir Vetma (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2021-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu napravljen je proračun naprezanja i pomaka konzolnog nosača otvorenog tankostjenog poprečnog presjeka za slučaj opterećenja okomitom silom na slobodnom kraju konzolnog nosača koja prolazi težištem poprečnog presjeka. Proračun se vršio za dva osnovna primjera, od kojih je svaki napravljen za tri varijante primjera pod uvjetom da površina poprečnog presjeka ostane nepromijenjena. Rezultati su prikazani grafički i tablično pomoću programskog paketa Excel koje su dane u prilogu dokumenta.
Abstract (english)
In this bachelor thesis, the stress and strain calculation of the cantilever girder of open thin-walled cross-section for the case of vertical force loading at the free end of the cantilever girder passing through the center of gravity of the cross-section is made. The calculation was performed for two basic examples, each of which was made for three variants of the example provided that the cross-sectional area remained unchanged. The results are presented graphically and tabularly using the Excel software package given in the attached document.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:120665
Study programmeTitle: Mechanical Engineering – specialist graduate - professional
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/ specijalistica inženjer/ inženjerka strojarstva (stručni/a specijalist/ specijalistica inženjer/ inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-08-24 08:48:28