prikaz prve stranice dokumenta ISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM
Access restricted to students and staff of home institution
master's thesis
ISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM
Split: University of Split, 2022. urn:nbn:hr:228:757365
Barižon, Isabela
University of Split
University Department of Professional Studies

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Barižon, I. (2022). ISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM (Master's thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:757365

Barižon, Isabela. "ISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM." Master's thesis, University of Split, 2022. https://urn.nsk.hr/urn:nbn:hr:228:757365

Barižon, Isabela. "ISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM." Master's thesis, University of Split, 2022. https://urn.nsk.hr/urn:nbn:hr:228:757365

Barižon, I. (2022). 'ISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM', Master's thesis, University of Split, accessed 02 March 2025, https://urn.nsk.hr/urn:nbn:hr:228:757365

Barižon I. ISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM [Master's thesis]. Split: University of Split; 2022 [cited 2025 March 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:757365

I. Barižon, "ISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM", Master's thesis, University of Split, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:228:757365

Metadata
TitleISPITIVANJE MEHANIČKIH SVOJSTAVA POLIMERNIH ISPITNIH UZORAKA DOBIVENIH ADITIVNOM TEHNOLOGIJOM
Title (english)THE MECHANICAL TESTING OF POLYMER THROUGH THE ADDITIVE MANUFACTURING
AuthorIsabela Barižon
MentorDanijela Pezer (mentor)
Committee memberZlatko Jankoski (član povjerenstva)
Committee memberSlaven Šitić (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
Split
Defense date and country2022-04-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog rada bavi se ispitivanjem mehaničkih svojstava polimernih ispitnih uzoraka dobivenih aditivnom tehnologijom. Prije samog početka eksperimentalnog dijela napravljen je centralno kompozitni plan pokusa za dva faktora. Promatrani faktori su debljina sloja i brzina printanja te je potrebno definirati 11 stanja pokusa. Ispitni uzorci su napravljeni od materijala PLA, a aditivna tehnologija koja je korištena je FDM tehnologija 3D printanja. Promatrana mehanička svojstva su vlačna čvrstoća i istezljivost (modul elastičnosti) što znači da je riječ o eksperimentalnom dijelu gdje se uzorci ispituju na vlak. Nakon završenog pokusnog dijela (koji se izvodio na univerzalnoj kidalici) dobivena je tablica analize rezultata vlačne čvrstoće i modula elastičnosti. Unošenjem rezultata vlačne čvrstoće i modula elastičnosti u program Design Expert, izvršena je analiza rezultata posebno za svaki te popraćena tablicama i dijagramima.
Abstract (english)
The topic of this graduate thesis is the mechanical testing of polymer through the additive manufacturing. Before the beginning of the experimental part, it was made a centrally composite plan for two factors. The observed factors are layer thickness and print speed, it was necessary to define 11 experimental states. The test samples were made of PLA material, and the additive manufacturing was FDM 3D printing technology. The observed mechanical properties are tensile strength and elongation (elastic modulus), which means that this is the experimental part where the samples are tensile tested. After the completion of the experimental part (which was performed on a universal testing machine), a table of analysis was obtained the results of tensile strength and elastic modulus. By entering the results of tensile strength and elastic modulus in the Design Expert program, an analysis of the results was made separately for each and accompanied by tables and diagrams.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:757365
Study programmeTitle: Mechanical Engineering – specialist graduate - professional
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/ specijalistica inženjer/ inženjerka strojarstva (stručni/a specijalist/ specijalistica inženjer/ inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-04-21 10:48:17