prikaz prve stranice dokumenta UTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA
Access restricted to students and staff of home institution
undergraduate thesis
UTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA
Split: University of Split, 2019. urn:nbn:hr:228:453265
Vrdoljak, Perica
University of Split
University Department of Professional Studies

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Vrdoljak, P. (2019). UTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:453265

Vrdoljak, Perica. "UTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA." Undergraduate thesis, University of Split, 2019. https://urn.nsk.hr/urn:nbn:hr:228:453265

Vrdoljak, Perica. "UTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA." Undergraduate thesis, University of Split, 2019. https://urn.nsk.hr/urn:nbn:hr:228:453265

Vrdoljak, P. (2019). 'UTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA', Undergraduate thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:453265

Vrdoljak P. UTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA [Undergraduate thesis]. Split: University of Split; 2019 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:453265

P. Vrdoljak, "UTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA", Undergraduate thesis, University of Split, Split, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:228:453265

Metadata
TitleUTJECAJ DODATNOG MATERIJALA NA ZAVARLJIVOST LEGURE "EN AC 46400" AUTOMOBILSKOG SPREMNIKA ULJA
Title (english)THE INFLUENCE OF ADDITIONAL MATERIAL ON THE ALLOY'S "EN AC 46400" WELDABILITY IN THE AUTOMOBILE'S OIL TANK
AuthorPerica Vrdoljak
MentorSLAVEN ŠITIĆ (mentor)
Committee memberZLATKO JANKOSKI (član povjerenstva)
Committee memberIGOR GABRIĆ (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
Split
Defense date and country2019-07-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovome radu opisan je utjecaj dodatnog materijala na zavarljivost legure „EN AC 46400“ automobilskog spremnika ulja. U uvodu se govori općenito o TIG postupku zavarivanja i ukratko se opisuje Al-Si legura kao i njezine prednosti i nedostatci. Navode se postupci zavarivanja aluminijskih legura i sama zavarljivost aluminijskih legura kao i problemi prilikom zavarivanja. U nastavku se opisuje i razrađuje priprema epruveta i navode se vrste legura kojima se zavaruju, kao i prednosti i nedostatci zavarenih spojeva AlSi5 i AlSi12 legurom. Radi se simulacija na statičku vlačnu probu dobivene Al legure te legura dodatnih materijala u Autodesk Inventor. Na kraju je prikazan proces ispitivanja dobivene vrijednosti. Zaključak je baziran na proces ispitivanja i zavarljivost AlSi9Cu1 legure u ovisnosti od dodatnog materijala (AlSi5 i AlSi12).
Abstract (english)
The influence of additional material on the alloy's („EN AC 46400“) weldability in the automobile's oil tank The introduction generally reffers to the TIG welding process and briefly describes the Al-Si alloy as well as its adventages and disadventages. Aluminium alloy welding procedures and aluminium alloy weldibility itself as well as problems occurring throghout welding. The following describes and elaborates the preparation of the test tubes, specifying the types of alloys to be welded with and listing the pros and cons of welded joints with both AlSi5 and AlSi12 alloy. Next a static tensile analysis of the obtained Al alloy and alloys from additional materials is made with Autodesk Inventor softwere. At the very end,the process of testinog of the obtained value is presented. The conclusion is based on the test process and weldability of the AlSi9Cu1 alloy depending on the additional (AlSi5 and AlSi12).
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:453265
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-07-10 06:32:49