prikaz prve stranice dokumenta TOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE
  Download
PDF 7.13 MB
undergraduate thesis
TOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE
Split: University of Split, 2023. urn:nbn:hr:228:177714
Žuvan, Kristian
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Žuvan, K. (2023). TOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:177714

Žuvan, Kristian. "TOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE." Undergraduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:177714

Žuvan, Kristian. "TOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE." Undergraduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:177714

Žuvan, K. (2023). 'TOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE', Undergraduate thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:177714

Žuvan K. TOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE [Undergraduate thesis]. Split: University of Split; 2023 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:177714

K. Žuvan, "TOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE", Undergraduate thesis, University of Split, Split, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:228:177714

Metadata
TitleTOPLINSKA OBRADA ŽILAVOG LIJEVA-ANALIZA PARAMETARA OBRADE
Title (english)THERMAL TREATMENT OF NODULAR IRON-ANALYSIS OF PROCESSING PARAMETERS
AuthorKristian Žuvan
MentorIgor Gabrić (mentor)
Committee memberZlatko Jankoski (član povjerenstva)
Committee memberSlaven Šitić (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2023-06-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog završnog rada je utjecaj toplinske obrade na mehanička svojstva žilavog lijeva. U radu su opisane najčešće korištene toplinske obrade koje se provode na žilavom lijevu, ali fokus je bio na toplinskoj obradi izotermičkog poboljšavanja. U teoretskom dijelu rada se navode općenita svojstva žilavog lijeva te utjecaj toplinske obrade izotermičkog poboljšavanja na mehanička svojstva žilavog lijeva. U praktičnom dijelu rada izvršena su dva preliminarna pokusa kojim je izvršena kontrola raspoloživog žilavog lijeva čime je utvrđeno da se radi o nelegiranom žilavom lijevu EN‒GJS‒500. Na temelju utvrđenog materijala odabrana je toplinska obrada austempering (izotermičko poboljšavanje) s ciljem postizanja bajnitne strukture. Plan pokusa je generiran korištenjem centralnog kompozitnog plana. Nakon završetka toplinske obrade izvršeno je mjerenje tvrdoće epruveta nakon čega je izvršena statistička obrada podataka, a dobiveni rezultati su prikazani i komentirani u radu.
Abstract (english)
The topic of this final thesis is the influence of heat treatment on the mechanical properties of ductile cast iron. The paper describes the most commonly used heat treatments that are conducted on ductile casting, but the focus was on isothermal heat treatment. In the theoretical part of the thesis, the general properties of ductile iron and the influence of isothermal heat treatment on the mechanical properties of ductile iron are stated. In the practical part of the thesis, two preliminary experiments were carried out to control the available ductile iron, which determined that it was unalloyed ductile iron EN-GJS-400. On the basis of the determined material, heat treatment austempering (isothermal improvement) was chosen with the aim of achieving a bainitic structure. The test plan was generated using a central composite design. After heat treatment, the hardness of the test tubes was measured, and statistical processing of the data was performed. The obtained results were presented and commented in the paper.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:177714
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2023-12-16
Terms of useLicence In copyright icon
Created on2023-06-16 12:46:26