prikaz prve stranice dokumenta PRORAČUN I DIMENZIONIRANJE OJAČANE GREDE
  Download
PDF 1.76 MB
undergraduate thesis
PRORAČUN I DIMENZIONIRANJE OJAČANE GREDE
Split: University of Split, 2023. urn:nbn:hr:228:950190
Kokić, Anamaria
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Kokić, A. (2023). PRORAČUN I DIMENZIONIRANJE OJAČANE GREDE (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:950190

Kokić, Anamaria. "PRORAČUN I DIMENZIONIRANJE OJAČANE GREDE." Undergraduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:950190

Kokić, Anamaria. "PRORAČUN I DIMENZIONIRANJE OJAČANE GREDE." Undergraduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:950190

Kokić, A. (2023). 'PRORAČUN I DIMENZIONIRANJE OJAČANE GREDE', Undergraduate thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:950190

Kokić A. PRORAČUN I DIMENZIONIRANJE OJAČANE GREDE [Undergraduate thesis]. Split: University of Split; 2023 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:950190

A. Kokić, "PRORAČUN I DIMENZIONIRANJE OJAČANE GREDE", Undergraduate thesis, University of Split, Split, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:228:950190

Metadata
TitlePRORAČUN I DIMENZIONIRANJE OJAČANE GREDE
Title (english)CALCULATION AND DIMENSIONING OF THE REINFORCED BEAM
AuthorAnamaria Kokić
MentorAdo Matoković (mentor)
Committee memberIgor Gabrić (član povjerenstva)
Committee memberZlatko Jankoski (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2023-07-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je izvršen proračun grede ojačane rešetkastom konstrukcijom koja se sastoji od štapova i linijskog nosača. U uvodnom dijelu su opisani linijski i rešetkasti nosači te su navedene i opisane dvije metode određivanja sila u štapovima rešetke. Nakon određivanja reakcija u osloncima grede i unutarnjih sila u nezavisnim područjima grede, rezultati dobiveni analitičkim izračunom vrijednosti unutarnjih sila u poprečnom presjeku nosača uspoređeni su s rezultatom dobivenih vrijednosti iz programskog paketa MDSolids. U nastavku je izvršeno dimenzioniranje štapova ojačanja za konstrukcijski čelik S235 i aluminijsku slitinu EN AW-6082 te dimenzioniranje linijskog nosača. U posljednjem dijelu rada izvršeno je oblikovanje i dimenzioniranje proizvoljno odabranog čvora rešetkaste konstrukcije.
Abstract (english)
In this paper, the calculation of a beam reinforced with a lattice structure consisting of rods and a linear support was performed. In the introductory part, linear and truss supports are described, and two methods of determining forces in truss rods are listed and described. After determining the reactions in the beam supports and the internal forces in the independent areas of the beam, the results obtained by analytically calculating the values of the internal forces in the cross section of the beam were compared with the results obtained from the MDSolids software package. In the following, the dimensioning of the reinforcement rods for structural steel S235 and aluminum alloy EN AW-6082 and the dimensioning of the linear support were carried out. In the last part of this paper, the shaping and dimensioning of an arbitrarily selected node of the lattice structure was performed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:950190
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-07-11 08:34:25