prikaz prve stranice dokumenta DIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA
Access restricted to students and staff of home institution
graduate thesis
DIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA
Split: University of Split, 2023. urn:nbn:hr:228:895830
Anušić, Ante
University of Split
University Department of Professional Studies
Department of Electrical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Anušić, A. (2023). DIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA (Graduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:895830

Anušić, Ante. "DIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA." Graduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:895830

Anušić, Ante. "DIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA." Graduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:895830

Anušić, A. (2023). 'DIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA', Graduate thesis, University of Split, accessed 11 July 2024, https://urn.nsk.hr/urn:nbn:hr:228:895830

Anušić A. DIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA [Graduate thesis]. Split: University of Split; 2023 [cited 2024 July 11] Available at: https://urn.nsk.hr/urn:nbn:hr:228:895830

A. Anušić, "DIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA", Graduate thesis, University of Split, Split, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:228:895830

Metadata
TitleDIZAJN SENZORA ZA MJERENJE VIBRACIJA ELEKTRIČNIH STROJEVA
Title (english)DESIGN OF SENSOR FOR MEASURING VIBRATIONS OF ELECTRICAL MACHINES
AuthorAnte Anušić
MentorTonko Kovačević (mentor)
Committee memberMarko Vukšić (član povjerenstva)
Committee memberVjekoslav Zrno (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Electrical Engineering)
Split
Defense date and country2023-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Mjerenje vibracija je nerazorna metoda ispitivanja odnosno procjene ispravnosti električnih strojeva poput motora, generatora i transformatora. U radu je provedena analiza mogućnosti korištenja jefinih i lako dostupnih sklopovskih i programskih rješenja za izradu senzora koji mjeri vibracije električnih strojeva. Navedeni su uzroci vibracija, kvarovi koji se zbog njih razvijaju te markeri u frekvencijskoj domeni koji upućuju na određenu vrstu kvara. Objašnjena je arhitektura sustava za prikupljanje podataka. Obavljena je analiza prikupljenih uzoraka vibracijskih signala u frekvencijskoj domeni korištenjm programskog paketa Matlab i FFT (engl. Fast Fourier Transform) algoritma koji se izvršava na testnom modulu DOIT ESP32 DEVKIT V1. Usporedbom dobivenih rezultata dokazan je ispravan rad senzora za mjerenje vibracija električnih strojeva.
Abstract (english)
Vibration measurement is a non-destructive method of testing or assessing the health of electrical machines such as motors, generators and transformers. The paper analyzes the possibility of using inexpensive and easily available hardware and software solutions for the creation of a sensor that measures the vibrations of electrical machines. The causes of vibrations, the defects that develop due to them and the markers in the frequency domain that point to a certain type of defect are described. The architecture of the data collection system is explained. The analysis of the collected samples of vibration signals in the frequency domain was performed using the Matlab software package and the FFT (Fast Fourier Transform) algorithm which is executed on the DOIT ESP32 DEVKIT V1 test module. By comparing the obtained results, the correct operation of the sensor for measuring the vibrations of electrical machines has been proven.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:895830
Study programmeTitle: Electrical Engineering
Study programme type: professional
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike (magistar/magistra inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2023-11-15 14:36:10