prikaz prve stranice dokumenta PRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA
  Download
PDF 4 MB
graduate thesis
PRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA
Split: University of Split, 2023. urn:nbn:hr:228:943448
Caktaš, Slavko
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Caktaš, S. (2023). PRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA (Graduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:943448

Caktaš, Slavko. "PRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA." Graduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:943448

Caktaš, Slavko. "PRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA." Graduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:943448

Caktaš, S. (2023). 'PRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA', Graduate thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:943448

Caktaš S. PRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA [Graduate thesis]. Split: University of Split; 2023 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:943448

S. Caktaš, "PRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA", Graduate thesis, University of Split, Split, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:228:943448

Metadata
TitlePRIMJENA METODE SILA I METODE POMAKA NA PRORAČUN OKVIRNOG NOSAČA
Title (english)APPLICATION OF THE FORCE METHOD AND DISPLACEMENT METHOD TO THE CALCULATION OF THE FRAME BEAM
AuthorSlavko Caktaš
MentorAdo Matoković (mentor)
Committee memberZlatko Jankoski (član povjerenstva)
Committee memberVladimir Vetma (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2023-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnom dijelu završnog rada pod nazivom „Primjena metode sila i metode pomaka na proračun okvirnog nosača“ na nekim jednostavnijim primjerima prikazan je postupak rješavanja metode sila i metode pomaka, te osnovne razlike između tih metoda. U nastavku rada je riješen jedanput statički neodređen okvirni nosač s zglobom primjenom metode sila. Zatim je radi usporedbe riješen okvirni nosač sa jednakim duljinama, modulima elastičnosti te vanjskim opterećenjima i osloncima, uz jednu preinaku gdje je umjesto zgloba umetnut kutni zavar. Taj zadatak je riješen pomoću metode sila gdje je bio dva puta statički neodređen, te nakon toga pomoću metode pomaka gdje je bio tri puta kinematički neodređen. U posljednjem dijelu završnog rada je izvršena provjera dobivenih dijagrama i rezultata koristeći se programskim paketom 2D Frame Analysis.
Abstract (english)
In the introductory part of the final paper entitled "Application of the force method and displacement method to the calculation of the frame beam" on some simple examples the procedure of solving the force method and displacement method, and the basic differences between these methods are presented. In the continuation of the work, a statically indeterminate frame beam with a joint was solved once using the force method. Then, for comparison, a frame beam with equal lengths, modulus of elasticity and external loads and supports was solved, with one modification where an angular weld was inserted instead of the joint. This problem was solved using the force method where it was twice statically indeterminate, and then using the displacement method where it was three times kinematically indeterminate. In the last part of the final paper, the obtained diagrams and results were checked using the 2D Frame Analysis software package.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:943448
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-11-16 12:03:33