prikaz prve stranice dokumenta TEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA
  Download
PDF 3.07 MB
undergraduate thesis
TEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA
Split: University of Split, 2023. urn:nbn:hr:228:679762
Palinić, Josip
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Palinić, J. (2023). TEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:679762

Palinić, Josip. "TEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA." Undergraduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:679762

Palinić, Josip. "TEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA." Undergraduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:679762

Palinić, J. (2023). 'TEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA', Undergraduate thesis, University of Split, accessed 04 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:679762

Palinić J. TEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA [Undergraduate thesis]. Split: University of Split; 2023 [cited 2024 December 04] Available at: https://urn.nsk.hr/urn:nbn:hr:228:679762

J. Palinić, "TEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA", Undergraduate thesis, University of Split, Split, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:228:679762

Metadata
TitleTEHNOLOGIJA POSTUPKA ZAVARIVANJA I POPRAVAK OSOVINE ZA ISPITIVANJE BRODSKIH SUSTAVA
Title (english)TECHNOLOGY OF THE WELDING PROCEDURE AND SHAFT REPAIR FOR TESTING SHIP SYSTEMS
AuthorJosip Palinić
MentorSlaven Šitić (mentor)
Committee memberDanijela Pezer (član povjerenstva)
Committee memberIvan Vrljičak (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2023-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovome radu opisan je postupak popravka osovine za ispitivanje brodskih sustava izrađene od čelika CK45 na kojoj je došlo do nastanka pukotine u samome zavaru prilikom procesa zavarivanja. Zbog nemogućnosti nabavke nove osovine u kratkome vremenskom roku, odlučeno je da će se pristupiti popravku oštećene osovine na način da stari zavareni spoj bude uklonjen i osovina ponovno zavarena. Neadekvatnom toplinskom obradom prije, za vrijeme i poslije procesa zavarivanja postiže se spoj sklon nastajanju pukotina i tehnički neispravnog zavara. Pravilnom pripremom procesa zavarivanja na dijelu osovine gdje će se vršiti proces zavarivanja i naknadnom toplinskom obradom, postići će se kvalitetan spoj koji će omogućiti daljnju upotrebu osovine za ispitivanje brodskih sustava.
Abstract (english)
This paper describes the procedure for reparing a shaft for testing ship systems made of CK45 steel, on which a crack occurred in the weld itself during the welding process. Due to the impossibility of procuring a new axle in short period of time, it was decided that the damaged axle would be repaired by removing the old weld joint and reweld the axle. Inadequate heat treatment before, during and after the weldnig process results in joint porne to cracks and technically defective weld. By properly preparing the welding process on the part of the shaft where the welding process will be preformed and subsequent heat treatment, a quality join will be achived that will enable further use of the saft for testing ship systems.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:679762
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2024-11-20
Terms of useLicence In copyright icon
Created on2023-11-20 12:54:00