prikaz prve stranice dokumenta REKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY
  Download
PDF 1.49 MB
undergraduate thesis
REKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY
Split: University of Split, 2023. urn:nbn:hr:228:395153
Tomašević, Maja
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Tomašević, M. (2023). REKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:395153

Tomašević, Maja. "REKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY." Undergraduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:395153

Tomašević, Maja. "REKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY." Undergraduate thesis, University of Split, 2023. https://urn.nsk.hr/urn:nbn:hr:228:395153

Tomašević, M. (2023). 'REKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY', Undergraduate thesis, University of Split, accessed 03 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:395153

Tomašević M. REKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY [Undergraduate thesis]. Split: University of Split; 2023 [cited 2024 December 03] Available at: https://urn.nsk.hr/urn:nbn:hr:228:395153

M. Tomašević, "REKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY", Undergraduate thesis, University of Split, Split, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:228:395153

Metadata
TitleREKONSTRUKCIJA I KALIBRACIJA UREĐAJA ZA MJERENJE UDARNE ŽILAVOSTI METALA PO CHARPY
Title (english)RECONSTRUCTION AND CALIBRATION OF THE DEVICE FOR MEASURING THE IMPACT TOUGHNESS OF METALS ACCORDING TO CHARPY
AuthorMaja Tomašević
MentorIgor Gabrić (mentor)
Committee memberAdo Matoković (član povjerenstva)
Committee memberDanijela Pezer (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2023-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu izvršena je rekonstrukcija već postojećeg uređaja za ispitivanje udarne žilavosti materijala po Charpyju. Uređaj je bilo potrebno rekonstruirati zbog pojave vibracija i kao posljedice rasipanja energije postojećeg bata, a time do većih mjerenih vrijednosti udarne žilavosti materijala. Do pojave vibracija dolazi zbog odstupanja težišta od točke udara, a time do pojave momenta savijanja koji uzrokuje vibracije. Dano je više mogućih varijanti, a na kraju je usvojena varijanta koja zadovoljava sve postavljene zahtjeve. Izvršena je konstrukcijska razrada usvojene varijante, proračunate su i raspoređene mase pokretnog dijela bata t ako da se težište poklapa s točkom udara. Izvršena je i rekonstrukcija nosivog krana tako da su omogućene dvije početne pozicije bata i to za energiju 150 i 300J kako bi se mogli ispitivati žilaviji i krti materijali.
Abstract (english)
In this final thesis, a reconstruction of an existing Charpy impact toughness testing device was carried out. The device needed to be reconstructed due to the occurrence of vibrations and the consequent energy dissipation of the existing hammer, resulting in higher measured values of material impact toughness. Vibrations occur due to the deviation of the center of gravity from the point of impact, leading to the occurrence of bending moments that cause vibrations. Several possible variants were considered, and in the end, the variant that met all the specified requirements was adopted. A design analysis of the adopted variant was performed, and the masses of the moving part of the hammer were calculated and distributed to align the center of gravity with the point of impact. The supporting crane was also reconstructed to enable two initial positions of the hammer, one for 150J and another for 300J energy levels, in order to test both tougher and more brittle materials.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:395153
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-11-22 09:46:45