prikaz prve stranice dokumenta MODELIRANJE KOČIONOG SKLOPA AUTOMOBILA
  Download
PDF 2.36 MB
undergraduate thesis
MODELIRANJE KOČIONOG SKLOPA AUTOMOBILA
Split: University of Split, 2024. urn:nbn:hr:228:496843
Šakić, Jozo
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Šakić, J. (2024). MODELIRANJE KOČIONOG SKLOPA AUTOMOBILA (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:496843

Šakić, Jozo. "MODELIRANJE KOČIONOG SKLOPA AUTOMOBILA." Undergraduate thesis, University of Split, 2024. https://urn.nsk.hr/urn:nbn:hr:228:496843

Šakić, Jozo. "MODELIRANJE KOČIONOG SKLOPA AUTOMOBILA." Undergraduate thesis, University of Split, 2024. https://urn.nsk.hr/urn:nbn:hr:228:496843

Šakić, J. (2024). 'MODELIRANJE KOČIONOG SKLOPA AUTOMOBILA', Undergraduate thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:496843

Šakić J. MODELIRANJE KOČIONOG SKLOPA AUTOMOBILA [Undergraduate thesis]. Split: University of Split; 2024 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:496843

J. Šakić, "MODELIRANJE KOČIONOG SKLOPA AUTOMOBILA", Undergraduate thesis, University of Split, Split, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:228:496843

Metadata
TitleMODELIRANJE KOČIONOG SKLOPA AUTOMOBILA
Title (english)MODELlING OF CAR BRAKE SYSTEM
AuthorJozo Šakić
MentorIvan Vrljičak (mentor)
Committee memberZlatko Jankoski (član povjerenstva)
Committee memberDanijela Pezer (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2024-07-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovome završnome radu pod nazivom „Modeliranje kočionog sklopa automobila“ izvršeno je modeliranje disk kočnica automobila pomoću softverskog paketa „Autodesk Inventor “. Završni rad je podijeljen u tri poglavlja. U prvom poglavlju ovog završnoga razrađen je povijesni razvoj hidrauličkih kočnica te je opisan način funkcioniranja disk kočnica te svrha svakog pojedinoga elementa unutar sklopa. U drugom poglavlju završnoga rada provedeni su osnovni proračuni. U zadnjem poglavlju završnog rada modelirane su disk kočnice te je priložena sva potrebna tehnička dokumentacija za izradu istih.
Abstract (english)
In this final thesis entitled "Modelling of Car Brake System", the modelling of car disc brakes was carried out using the software package "Autodesk Inventor." The thesis is divided into three chapters. The first chapter discusses the historical development of hydraulic brakes and describes the functioning of disc brakes as well as the purpose of each individual component within the system. The second chapter presents the basic calculations. In the final chapter of the thesis, the disc brakes are modelled and all the necessary technical documentation for their production is provided.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:496843
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-07-08 07:44:37