prikaz prve stranice dokumenta PRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA
Access restricted to students and staff of home institution
graduate thesis
PRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA
Split: University of Split, 2024. urn:nbn:hr:228:231839
Grizelj, Šimun
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Grizelj, Š. (2024). PRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA (Graduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:231839

Grizelj, Šimun. "PRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA." Graduate thesis, University of Split, 2024. https://urn.nsk.hr/urn:nbn:hr:228:231839

Grizelj, Šimun. "PRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA." Graduate thesis, University of Split, 2024. https://urn.nsk.hr/urn:nbn:hr:228:231839

Grizelj, Š. (2024). 'PRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA', Graduate thesis, University of Split, accessed 10 January 2025, https://urn.nsk.hr/urn:nbn:hr:228:231839

Grizelj Š. PRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA [Graduate thesis]. Split: University of Split; 2024 [cited 2025 January 10] Available at: https://urn.nsk.hr/urn:nbn:hr:228:231839

Š. Grizelj, "PRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA", Graduate thesis, University of Split, Split, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:228:231839

Metadata
TitlePRIMJENA CNC TEHNOLOGIJE ZA OBLIKOVANJE TEHNOLOŠKOG PROCESA PRI IZRADI PROIZVODA IZ LIMA
Title (english)APPLICATION OF CNC TECHNOLOGY FOR DESIGN OF THE TECHNOLOGICAL PROCESS IN THE PRODUCTION OF SHEET METAL PRODUCTS
AuthorŠimun Grizelj
MentorDanijela Pezer (mentor)
Committee memberSlaven Šitić (član povjerenstva)
Committee memberIgor Šuljić (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2024-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je potrebno objasniti primjenu CNC tehnologije za oblikovanje tehnološkog procesa pri izradi proizvoda od lima. Prvi korak je analiza zaprimljenih nacrta i ponude koji se proučavaju i dijele na segmente. Za svaki posebni segment potrebno je oblikovati 3D model ili redizajnirati postojeći model korišten u prethodnim projektima. Svi dijelovi iz 3D modela se prosljeđuju u .dxf formatu. Za racionalno iskorištenje limova i postavljanje limova na pojedinu ploču korišten je softver Metalix. Hidraulička probijalica TRUMP TRUMATIC 500 korištena je za probijanje/prosijecanje limova nakon čega limovi idu na daljnju obradu savijanjem. Spajanje limova izvodi se postupak zavarivanja ili spojem zakovicama. Zavareni spojevi podvrgavaju se završnoj obradi brušenja te se u završnoj fazi izvodi montaža dijelova.
Abstract (english)
In the paper, it is necessary to explain the application of CNC technology for shaping the technological process in the production of sheet metal products. The first step is the analysis of the received drafts and offers, which are studied and divided into segments. For each special segment, it is necessary to produce a 3d model or change the model used in past projects. All parts from the 3D model are forwarded in .dxf format. The Metalix software was used for the rational use of sheets and the placement of sheets on each panel. The TRUMP TRUMATIC 500 hydraulic puncher was used for punching/cutting the sheets, after which the sheets go further processing by bending. Sheets are joined by welding or riveting. The welded joints are subjected to the final grinding process, and in the final stage, the assembly of the parts is carried out.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:231839
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2024-11-14 08:35:29