prikaz prve stranice dokumenta ANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA
Access restricted to students and staff of home institution
graduate thesis
ANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA
Split: University of Split, 2024. urn:nbn:hr:228:589313
Sekelez, Domagoj
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Sekelez, D. (2024). ANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA (Graduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:589313

Sekelez, Domagoj. "ANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA." Graduate thesis, University of Split, 2024. https://urn.nsk.hr/urn:nbn:hr:228:589313

Sekelez, Domagoj. "ANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA." Graduate thesis, University of Split, 2024. https://urn.nsk.hr/urn:nbn:hr:228:589313

Sekelez, D. (2024). 'ANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA', Graduate thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:589313

Sekelez D. ANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA [Graduate thesis]. Split: University of Split; 2024 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:589313

D. Sekelez, "ANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA", Graduate thesis, University of Split, Split, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:228:589313

Metadata
TitleANALIZA NAPREZANJA PRI SAVIJANJU I UVIJANJU TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA
Title (english)STRESS ANALYSIS DURING BENDING AND TORSION OF THIN-WALLED ROD WITH OPEN CROSS SECTION
AuthorDomagoj Sekelez
MentorAdo Matoković (mentor)
Committee memberBoris Mikulić (član povjerenstva)
Committee memberVladimir Vetma (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2024-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu se obrađuje tema tankostjenih štapova otvorenog poprečnog presjeka. Ispisani su izrazi za geometrijske karakteristike otvorenih poprečnih presjeka, diferencijalna jednadžba uvijanja i izrazi za normalna naprezanja. Kroz rad je prikazan potpuni proračun naprezanja i kuta uvijanja za pet od deset odabranih primjera. Koristeći program MS Excel napravljene su tablice za izračun naprezanja odabranih primjera koje omogućuju promjene dimenzija poprečnog presjeka i vrijednosti opterećenja štapa u primjeru. Primjeri, čiji proračuni nisu u potpunosti prikazani u radu, su prikazani pomoću MS Excela i dani su u prilogu dokumenta. Za kraj je izvršena usporedba rezultata dobivenih proračunom.
Abstract (english)
This paper deals with the topic of thin-walled rods with an open cross section. Expressions for geometric characteristics of cross sections, diferential equation for torsion and normal stress are . Through the paper a complete calculation of stress and angle of torsion is shown for five out of ten selected examples. Using the MS Excel software tables for calculating stress are made, which allow changes of dimension of cross section and the value of the load on the rod in the example. Examples, the calculations of which are not fully shown in the paper, are presented using MS Excel and are attached at the end of the document. Finaly, a comparison of the results obtained by calculation was made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:589313
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2024-11-15 11:11:36