prikaz prve stranice dokumenta PRORAČUN OJAČANOG LINIJSKOG NOSAČA
  Download
PDF 6.26 MB
undergraduate thesis
PRORAČUN OJAČANOG LINIJSKOG NOSAČA
Split: University of Split, 2019. urn:nbn:hr:228:938249
Trutanić, Branko
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Trutanić, B. (2019). PRORAČUN OJAČANOG LINIJSKOG NOSAČA (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:938249

Trutanić, Branko. "PRORAČUN OJAČANOG LINIJSKOG NOSAČA." Undergraduate thesis, University of Split, 2019. https://urn.nsk.hr/urn:nbn:hr:228:938249

Trutanić, Branko. "PRORAČUN OJAČANOG LINIJSKOG NOSAČA." Undergraduate thesis, University of Split, 2019. https://urn.nsk.hr/urn:nbn:hr:228:938249

Trutanić, B. (2019). 'PRORAČUN OJAČANOG LINIJSKOG NOSAČA', Undergraduate thesis, University of Split, accessed 02 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:938249

Trutanić B. PRORAČUN OJAČANOG LINIJSKOG NOSAČA [Undergraduate thesis]. Split: University of Split; 2019 [cited 2024 December 02] Available at: https://urn.nsk.hr/urn:nbn:hr:228:938249

B. Trutanić, "PRORAČUN OJAČANOG LINIJSKOG NOSAČA", Undergraduate thesis, University of Split, Split, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:228:938249

Metadata
TitlePRORAČUN OJAČANOG LINIJSKOG NOSAČA
Title (english)CALCULATION OF REINFORCED BEAM
AuthorBranko Trutanić
MentorAdo Matoković (mentor)
Committee memberVladimir Vetma (član povjerenstva)
Committee memberSlaven Šitić (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2019-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je izvršen proračun ojačanog linijskog nosača na način da je isti prikazan kao zbroj simetričnog i asimetričnog opterećenja. U uvodnom dijelu kratko je opisan proračun linijskih i rešetkastih nosača. Nakon proračunskog analiziranja izvršeno je dimenzioniranje linijskog nosača i štapova ojačanja te provjera tlačno opterećenih štapova na izvijanje. U posljednjem dijelu rada napravljen je proračun i dimenzioniranje čvornog lima na proizvoljno odabranom čvoru.
Abstract (english)
In this paper, the calculation of the reinforced beam is made in such a way that the load is presented as the sum of symmetric and antisymmetric loads. The introductory section briefly describes the calculation method of the beam and trusses. After the budgetary analysis had been carried out, designing of the beam and reinforcement rods was performed. In addition, compression loads of the pressure-loaded rods were checked. In the last part of the paper, the calculation and designing of the node sheet on an arbitrarily selected node were performed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:938249
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-10-30 11:56:41